Hello Guys, I have installed a quad port ethernet pcie adapter in my unraid. I can see all the 4 ports in the network settings, but when I enable any bonding, I get the message "device bond1 does not exist" on the boot screen. With bonding disabled, all 4 ports get an ip address and work fine but with bonding enabled, the lights on the switch go off. I have a managed switch and have tried with both LACP on and LACP off. I have tried the usb in a different port, also tried deleting all entries from the network.cfg file. Please helpunraid-diagnostics-20190319-1236.zip

You need to set this under the configuration of interface eth0.

• change interface eth0 to Enable bonding = YES
• choose the desired bonding mode (default is "active - standby")
• add the other interfaces (eth1, eth2, ...) as members of this bond

Note: all other interfaces must have bonding NO in order to select them as member of bond0.

thank you. that worked