gideva Posted April 8, 2019 Share Posted April 8, 2019 Hi guys, I am facing a problem on my server since a while now... All started when one of my hard drive crashed and I tried to swap with a new one but with no success (really I do not know what I did wrong but this is). No big deal, I lost some data but that was it. Some days after a new hard drive is giving me problems and same story.... I remove the faulty drive and I change with a new one. 3/4 days and the new disk is giving problems. I decide to perform a parity check and all is done even if the two last drives are giving a lot of errors but the check is ok at last. I reboot the system and the two new drives in Slot 15 and 16 are now missing... and I cannot start the array because the Invalid Configuration due to the errors. What the heck is going on??? Hope you can help me because this is driving me crazy Link to comment
gideva Posted April 8, 2019 Author Share Posted April 8, 2019 Little update... After changing the slot and reboot all seems to be fine!!! Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.