May 1, 20197 yr Is my disk dead or sata cable dead? ---- ----- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.20-unRAID] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4N6KK70FE LU WWN Device Id: 5 0014ee 20dc13dc7 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Apr 29 22:05:58 2019 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: (40320) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 404) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 149 3 Spin_Up_Time POS--K 211 176 021 - 4416 4 Start_Stop_Count -O--CK 100 100 000 - 55 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 075 075 000 - 18722 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 54 192 Power-Off_Retract_Count -O--CK 200 200 000 - 38 193 Load_Cycle_Count -O--CK 188 188 000 - 37162 194 Temperature_Celsius -O---K 122 112 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 8 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 19 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 9 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9 [8] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 57 95 4b d0 e0 00 Error: IDNF 8 sectors at LBA = 0x57954bd0 = 1469402064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 08 00 00 57 95 4b d0 e0 08 00:07:53.832 WRITE DMA EXT b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:07:22.818 SMART READ DATA ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:07:22.755 FLUSH CACHE EXT ec 00 00 00 01 00 00 00 00 00 00 00 08 00:07:22.754 IDENTIFY DEVICE 35 00 00 00 08 00 00 ae c9 20 88 e0 08 00:07:22.749 WRITE DMA EXT Error 8 [7] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:50.555 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:50.555 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:50.555 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:50.555 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:50.555 SET FEATURES [Set transfer mode] Error 7 [6] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:43.549 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:43.548 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:43.548 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:43.548 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:43.548 SET FEATURES [Set transfer mode] Error 6 [5] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:36.545 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:36.545 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:36.545 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:36.544 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:36.544 SET FEATURES [Set transfer mode] Error 5 [4] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:29.539 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:29.539 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:29.539 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:29.538 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:29.538 SET FEATURES [Set transfer mode] Error 4 [3] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:22.527 WRITE DMA EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:05:22.527 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:05:22.527 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:05:22.526 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:05:22.526 SET FEATURES [Set transfer mode] Error 3 [2] occurred at disk power-on lifetime: 18722 hours (780 days + 2 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 05 40 00 00 01 7a a2 e0 e0 00 Error: IDNF 1344 sectors at LBA = 0x017aa2e0 = 24814304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 05 40 00 00 01 7a a2 e0 e0 08 00:05:15.513 WRITE DMA EXT 35 00 00 05 40 00 00 01 7a 9d a0 e0 08 00:05:15.509 WRITE DMA EXT 35 00 00 05 40 00 00 01 7a 98 60 e0 08 00:05:15.493 WRITE DMA EXT 35 00 00 01 80 00 00 01 7a 96 e0 e0 08 00:05:15.448 WRITE DMA EXT 35 00 00 05 40 00 00 01 7a 91 a0 e0 08 00:05:15.444 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 18128 hours (755 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 07 11 84 00 e7 00 Error: UNC at LBA = 0x07118400 = 118588416 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- c8 00 00 00 00 00 00 07 11 83 b0 e7 08 9d+09:44:06.218 READ DMA c8 00 00 00 00 00 00 07 11 82 b0 e7 08 9d+09:44:06.217 READ DMA c8 00 00 00 00 00 00 07 11 81 b0 e7 08 9d+09:44:06.217 READ DMA c8 00 00 00 00 00 00 07 11 80 b0 e7 08 9d+09:44:06.216 READ DMA c8 00 00 00 00 00 00 07 11 7f b0 e7 08 9d+09:44:06.215 READ DMA SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 18722 4550216 # 2 Short offline Interrupted (host reset) 10% 18722 - # 3 Short offline Completed without error 00% 17547 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 28/28 Celsius Lifetime Min/Max Temperature: 2/38 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (227) Index Estimated Time Temperature Celsius 228 2019-04-29 14:08 30 *********** ... ..(169 skipped). .. *********** 398 2019-04-29 16:58 30 *********** 399 2019-04-29 16:59 31 ************ 400 2019-04-29 17:00 31 ************ 401 2019-04-29 17:01 30 *********** ... ..( 71 skipped). .. *********** 473 2019-04-29 18:13 30 *********** 474 2019-04-29 18:14 29 ********** ... ..( 78 skipped). .. ********** 75 2019-04-29 19:33 29 ********** 76 2019-04-29 19:34 ? - 77 2019-04-29 19:35 27 ******** ... ..( 4 skipped). .. ******** 82 2019-04-29 19:40 27 ******** 83 2019-04-29 19:41 ? - 84 2019-04-29 19:42 25 ****** 85 2019-04-29 19:43 25 ****** 86 2019-04-29 19:44 26 ******* 87 2019-04-29 19:45 26 ******* 88 2019-04-29 19:46 26 ******* 89 2019-04-29 19:47 27 ******** ... ..( 3 skipped). .. ******** 93 2019-04-29 19:51 27 ******** 94 2019-04-29 19:52 ? - 95 2019-04-29 19:53 28 ********* 96 2019-04-29 19:54 28 ********* 97 2019-04-29 19:55 ? - 98 2019-04-29 19:56 28 ********* ... ..( 22 skipped). .. ********* 121 2019-04-29 20:19 28 ********* 122 2019-04-29 20:20 30 *********** ... ..( 83 skipped). .. *********** 206 2019-04-29 21:44 30 *********** 207 2019-04-29 21:45 29 ********** ... ..( 6 skipped). .. ********** 214 2019-04-29 21:52 29 ********** 215 2019-04-29 21:53 30 *********** ... ..( 11 skipped). .. *********** 227 2019-04-29 22:05 30 *********** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 54 --- Lifetime Power-On Resets 0x01 0x010 4 18722 --- Power-on Hours 0x01 0x018 6 6247826496 --- Logical Sectors Written 0x01 0x020 6 14926428 --- Number of Write Commands 0x01 0x028 6 128759046750 --- Logical Sectors Read 0x01 0x030 6 217708476 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18452 --- Spindle Motor Power-on Hours 0x03 0x010 4 14756 --- Head Flying Hours 0x03 0x018 4 37201 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 394 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 9 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 524320 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x010 1 27 --- Average Short Term Temperature 0x05 0x018 1 26 --- Average Long Term Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 18 --- Lowest Temperature 0x05 0x030 1 35 --- Highest Average Short Term Temperature 0x05 0x038 1 18 --- Lowest Average Short Term Temperature 0x05 0x040 1 31 --- Highest Average Long Term Temperature 0x05 0x048 1 21 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 156 --- Number of Hardware Resets 0x06 0x010 4 875 --- Number of ASR Events 0x06 0x018 4 24 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) supported [please try: '-l defects'] SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 1664 Vendor specific
Archived
This topic is now archived and is closed to further replies.