Xan Posted July 4, 2019 Share Posted July 4, 2019 Currently I am running 6.7.2 unraid & recently installed a perc h310 but now the drives show as missing/wrong. I built the array using the integrated s110 (non-raid) so I had 1 Parity and 3 Storage Drives. After adding the perc h310 running passthrough the drives so that they are unable to be matched in the main tab of unraid even though I have the serials matching thus not allowing me to start the array. I ended up moving the first 4 drives back to the s110 and added more drives to the h310. How do I go about getting everything on the h310 without having to rebuild from scratch? Link to comment
JorgeB Posted July 4, 2019 Share Posted July 4, 2019 A new config might work if the controller is using standard partitions, if not you'll need to rebuild one disk at a time (or two if you have dual parity). Link to comment
Xan Posted July 4, 2019 Author Share Posted July 4, 2019 10 hours ago, johnnie.black said: A new config might work if the controller is using standard partitions, if not you'll need to rebuild one disk at a time (or two if you have dual parity). Hoping a new config works. Been reading about it. Ill have to figure out how to do this without the breakdown cables for the backplane Link to comment
Xan Posted July 14, 2019 Author Share Posted July 14, 2019 On 7/4/2019 at 12:58 PM, Xan said: Hoping a new config works. Been reading about it. Ill have to figure out how to do this without the breakdown cables for the backplane That worked. Thank you. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.