sadeq Posted July 8, 2019 Share Posted July 8, 2019 (edited) I have brought the APC SRV1KRI ups with it's SNMP card "APV9601" (no web interface or any fancy stuff, only SNMP). then I downloaded the APC UPS Monitor software and it worked fine with it. but I can't configure it with unraid I have set the cable to ether and ups to SNMP and enabled APCUPSD the device field is: "<IP Address>:161:APC:private" the snmp community string field was empty so I set it to private ! Edited July 8, 2019 by sadeq SOLVED Quote Link to comment
sadeq Posted July 8, 2019 Author Share Posted July 8, 2019 so it was not a configuration problem. the problem is that apcupsd was not restarting, so I entered the terminal and typed "pkill apcupsd" and enabled it again from the web UI, a reboot would've solved the problem though. and btw, there is no need to type anything aside from the IP address of the device if the rest is default Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.