Voidsherpa Posted August 1, 2019 Share Posted August 1, 2019 This isn't for an unraid setup at the moment, but I'll be making an unraid server down the road. Figured this was a good place as any to ask since a lot of my google searches were pointing me back to these forums. I'm having issues with SAS drives in Norco SS-500 hot swap cages. I can't get the SAS drives to read through the backplane. I'm running to a MegaRAID SAS 9270-8i w/ an Int-MS-1M4S Mini-SAS to 4SATA cable. Sata drives will work, and I've verified the SAS drives are good by using a Mini-SAS to SAS fan out cable direct the the raid card. I'm not sure what cable I need to connect to the Sata ports on the back of the Norco SS-500 as the Int-MS-1M4S ones appear to not work with SAS drives. Then I was reading a few older threads on here about how Norco hot swap bays were burning up larger drives. Was this issue ever corrected? All 4 of my Norco SS-500's were purchases 2014 and the one I have pulled out at the moment is stamped FH-MZ-3-5 2012.08.08 Ver: 1.2, currently have 8 x HGST He8 8tb 5V 800mA 12V 660mA I'm looking to use in the SS-500's. If I have to pivot to Supermicro 5 in 3's to avoid risk I will, although I'd rather save $400 if possible. Any feedback would be appreciated. Quote Link to comment
Voidsherpa Posted August 14, 2019 Author Share Posted August 14, 2019 Does anybody know the best way to contact Norco support? I haven't had a response to the email I've sent them. Their FB page appears to be deactivated. I've pulled apart one of the chassis and nothing appears burned out, only damage was a cross-threaded standoff from manufacturing. I have another SFF-8087 to 4 sata cable in the mail to try, but I don't see how that's going to solve it. Quote Link to comment
Vr2Io Posted August 14, 2019 Share Posted August 14, 2019 It won't be cable problem, may be He8 ( SAS ? ) have same issue if apply 3.3v power then drive will put in disable. If you have multimeter, you may check does 3.3v at disk connector/blackplane. Quote Link to comment
Voidsherpa Posted August 14, 2019 Author Share Posted August 14, 2019 Looks like I will be taping pin 3. Thanks for the help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.