Jump to content
MarkPla7z

Parity Swap Problems

7 posts in this topic Last Reply

Recommended Posts

Hello, So I have a massive dilema, I did a partity swap procedure and started the copy process

Once the copy process completed the array stopped and asked me to do the copy process again

So I did it again and same problem. What should I do now ?

Does this mean ive lose all data ?

Share this post


Link to post

Very weird, each disk is being detected twice, with different letters, this is confusing Unraid, note parity is sdg, disk 2 sdf:

Aug 15 05:10:39 Tower kernel: mdcmd (1): import 0 sdg 64 2930266532 0 HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698
Aug 15 05:10:39 Tower kernel: md: import disk0: (sdg) HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698 size: 2930266532
Aug 15 05:10:39 Tower kernel: mdcmd (2): import 1
Aug 15 05:10:39 Tower kernel: md: import_slot: 1 empty
Aug 15 05:10:39 Tower kernel: mdcmd (3): import 2 sdf 64 2930266532 0 HUS723030ALS640_YHK3LB3G_35000cca01aafa228
Aug 15 05:10:39 Tower kernel: md: import disk2: (sdf) HUS723030ALS640_YHK3LB3G_35000cca01aafa228 size: 2930266532
Aug 15 05:10:39 Tower kernel: mdcmd (4): import 3 sde 64 2930266532 0 HUS724030ALS640_P8JPYX7W_35000cca02798ac54
Aug 15 05:10:39 Tower kernel: md: import disk3: (sde) HUS724030ALS640_P8JPYX7W_35000cca02798ac54 size: 2930266532

3 seconds later, parity is now sdd, disk 2 is sdc

Aug 15 05:10:42 Tower kernel: mdcmd (1): import 0 sdd 64 2930266532 0 HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698
Aug 15 05:10:42 Tower kernel: md: import disk0: (sdd) HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698 size: 2930266532
Aug 15 05:10:42 Tower kernel: mdcmd (2): import 1
Aug 15 05:10:42 Tower kernel: md: import_slot: 1 empty
Aug 15 05:10:42 Tower kernel: mdcmd (3): import 2 sdc 64 2930266532 0 HUS723030ALS640_YHK3LB3G_35000cca01aafa228
Aug 15 05:10:42 Tower kernel: md: import disk2: (sdc) HUS723030ALS640_YHK3LB3G_35000cca01aafa228 size: 2930266532
Aug 15 05:10:42 Tower kernel: mdcmd (4): import 3 sde 64 2930266532 0 HUS724030ALS640_P8JPYX7W_35000cca02798ac54
Aug 15 05:10:42 Tower kernel: md: import disk3: (sde) HUS724030ALS640_P8JPYX7W_35000cca02798ac54 size: 2930266532

3 seconds later, parity is still sdd, but disk 2 is sdf again

Aug 15 05:10:44 Tower kernel: mdcmd (1): import 0 sdd 64 2930266532 0 HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698
Aug 15 05:10:44 Tower kernel: md: import disk0: (sdd) HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698 size: 2930266532
Aug 15 05:10:44 Tower kernel: mdcmd (2): import 1
Aug 15 05:10:44 Tower kernel: md: import_slot: 1 empty
Aug 15 05:10:44 Tower kernel: mdcmd (3): import 2 sdf 64 2930266532 0 HUS723030ALS640_YHK3LB3G_35000cca01aafa228
Aug 15 05:10:44 Tower kernel: md: import disk2: (sdf) HUS723030ALS640_YHK3LB3G_35000cca01aafa228 size: 2930266532
Aug 15 05:10:44 Tower kernel: mdcmd (4): import 3 sde 64 2930266532 0 HUS724030ALS640_P8JPYX7W_35000cca02798ac54
Aug 15 05:10:44 Tower kernel: md: import disk3: (sde) HUS724030ALS640_P8JPYX7W_35000cca02798ac54 size: 2930266532

I never seen this problem before but until it's resolved Unraid won't work correctly, maybe you're trying to use SAS multipath, Unraid doesn't support that, make sure there's only one cable from the HBA to the enclosure.

Share this post


Link to post
3 minutes ago, johnnie.black said:

Very weird, each disk is being detected twice, with different letters, this is confusing Unraid, note parity is sdg, disk 2 sdf:


Aug 15 05:10:39 Tower kernel: mdcmd (1): import 0 sdg 64 2930266532 0 HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698
Aug 15 05:10:39 Tower kernel: md: import disk0: (sdg) HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698 size: 2930266532
Aug 15 05:10:39 Tower kernel: mdcmd (2): import 1
Aug 15 05:10:39 Tower kernel: md: import_slot: 1 empty
Aug 15 05:10:39 Tower kernel: mdcmd (3): import 2 sdf 64 2930266532 0 HUS723030ALS640_YHK3LB3G_35000cca01aafa228
Aug 15 05:10:39 Tower kernel: md: import disk2: (sdf) HUS723030ALS640_YHK3LB3G_35000cca01aafa228 size: 2930266532
Aug 15 05:10:39 Tower kernel: mdcmd (4): import 3 sde 64 2930266532 0 HUS724030ALS640_P8JPYX7W_35000cca02798ac54
Aug 15 05:10:39 Tower kernel: md: import disk3: (sde) HUS724030ALS640_P8JPYX7W_35000cca02798ac54 size: 2930266532

3 seconds later, parity is now sdd, disk 2 is sdc


Aug 15 05:10:42 Tower kernel: mdcmd (1): import 0 sdd 64 2930266532 0 HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698
Aug 15 05:10:42 Tower kernel: md: import disk0: (sdd) HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698 size: 2930266532
Aug 15 05:10:42 Tower kernel: mdcmd (2): import 1
Aug 15 05:10:42 Tower kernel: md: import_slot: 1 empty
Aug 15 05:10:42 Tower kernel: mdcmd (3): import 2 sdc 64 2930266532 0 HUS723030ALS640_YHK3LB3G_35000cca01aafa228
Aug 15 05:10:42 Tower kernel: md: import disk2: (sdc) HUS723030ALS640_YHK3LB3G_35000cca01aafa228 size: 2930266532
Aug 15 05:10:42 Tower kernel: mdcmd (4): import 3 sde 64 2930266532 0 HUS724030ALS640_P8JPYX7W_35000cca02798ac54
Aug 15 05:10:42 Tower kernel: md: import disk3: (sde) HUS724030ALS640_P8JPYX7W_35000cca02798ac54 size: 2930266532

3 seconds later, parity is still sdd, but disk 2 is sdf again


Aug 15 05:10:44 Tower kernel: mdcmd (1): import 0 sdd 64 2930266532 0 HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698
Aug 15 05:10:44 Tower kernel: md: import disk0: (sdd) HUS723030ALS640_YHK3JJ6G_35000cca01aaf8698 size: 2930266532
Aug 15 05:10:44 Tower kernel: mdcmd (2): import 1
Aug 15 05:10:44 Tower kernel: md: import_slot: 1 empty
Aug 15 05:10:44 Tower kernel: mdcmd (3): import 2 sdf 64 2930266532 0 HUS723030ALS640_YHK3LB3G_35000cca01aafa228
Aug 15 05:10:44 Tower kernel: md: import disk2: (sdf) HUS723030ALS640_YHK3LB3G_35000cca01aafa228 size: 2930266532
Aug 15 05:10:44 Tower kernel: mdcmd (4): import 3 sde 64 2930266532 0 HUS724030ALS640_P8JPYX7W_35000cca02798ac54
Aug 15 05:10:44 Tower kernel: md: import disk3: (sde) HUS724030ALS640_P8JPYX7W_35000cca02798ac54 size: 2930266532

I never seen this problem before but until it's resolved Unraid won't work correctly, maybe you're trying to use SAS multipath, Unraid doesn't support that, make sure there's only one cable from the HBA to the enclosure.

Lmao Yes theres to cables let me unplug one

Share this post


Link to post
Posted (edited)

Ok

Wish me good luck lol

 

 

Thanks for the help btw hopefully it works

Edited by MarkPla7z

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.