somail Posted October 4, 2019 Share Posted October 4, 2019 Hello, I previously had two drives produce a number of read/write errors. One of which was my parity drive. I re-seated and swapped cabling, and when I booted everything up my parity was in an error state. I then reseated cabling again and ran extended SMART tests on both drives to see if there are any issues. The SMART tests completed without errors and so I plan to reenable the parity drive. However, before doing so I would like to see if someone could review the attached SMART reports for both drives and confirm there are no red or yellow flags in the report. Thank you WDC_WD80EMAZ-00WJTA0_7JHHEJ2G-20191004-2308 parity (sdd) - DISK_DSBL.txt WDC_WD80EMAZ-00WJTA0_7JKUG0KC-20191004-2308 disk2 (sdc).txt Quote Link to comment
itimpi Posted October 5, 2019 Share Posted October 5, 2019 (edited) Nothing springs out as indicating any sign of problems with either drive as far as I can see. Edited October 5, 2019 by itimpi Quote Link to comment
somail Posted October 5, 2019 Author Share Posted October 5, 2019 Thanks itimpi. I appreciate the second set of eyes. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.