February 2, 20206 yr I'm relatively new to UnRaid but I've been really enjoying it. I think I started with version 6.7.2 and had upgraded to 6.8.1 (using the WebUI) with no problems. However, in this most recent upgrade from 6.8.1 to 6.8.2, I hit reboot and the system rebooted, but the array never started and it doesn't look like UnRaid ever really started - the WebUI/array never became accessible. I connected a local display and there was a Kernel Panic error. I used the power button to shut the computer down and turn it back on. This time everything seemed to come up OK - no kernel panic and everything is accessible. - The Parity check completed with zero errors - The WebUI currently shows I'm running 6.8.2 and I'm up-to-date - No operational issues and I'm running BTRFS scrubs (all array drives are BTRFS) just to make sure, but I don't have any reason to suspect data integrity issues. Is there anything else I need to check or confirm? I'm assuming this was a one-off event that a hard shutdown fixed, but being unfamiliar with UnRaid want to see if there's anything else I should look into. Thanks.
February 3, 20206 yr Community Expert Should be all fine, you might want to run chkdsk on the flash drive if it happens again.
Archived
This topic is now archived and is closed to further replies.