Yates07 Posted February 10, 2020 Share Posted February 10, 2020 (edited) the other day the power went out in my area and i noticed when i was checking on the server that a few of the disc are showing up as "missing", my parity disc is also showing as "no device". I have had this same setup since 2011 and never had any issues like this and not sure where to go. i swapped out some Sata cables as well as pull the discs and put them back in. I'm really not sure where to go from here. since so many disc are showing as missing i am unable to start the array. Also, I have been running 6.8.2 successfully for a while now without any issues until losing power. Any help would be greatly appreciated. tower-syslog-20200210-0121.zip Edited February 10, 2020 by Yates07 added syslog in attachments Quote Link to comment
itimpi Posted February 10, 2020 Share Posted February 10, 2020 I would check that the disks are being seen at the BiOS level and are correctly set as AHCI. Failing that providing the full diagnostics zip file rather than just the syslog might help with diagnosis. Quote Link to comment
Yates07 Posted February 13, 2020 Author Share Posted February 13, 2020 (edited) I have attached the diagnostics zip file. Thanks for the reply and the help tower-diagnostics-20200213-1652.zip Edited February 14, 2020 by Yates07 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.