preclear fails at pre-read, returnRMA?

[Sour]

 Hi, everyone.

 

Do you have bad drive when you have a pre-clear pre-read fail? Not sure what it means. Any knowledge is good knowledge.  thanks in advance!

 

Rob

preclear_disk_394A4B31355A4554_21416.txt

[gfjardim]

Please share your diagnostics file.

[Sour]

syslog.txt

 

Hope that is the correct log.

[gfjardim]

Apparently your USB connection dropped (cable, controller, hard drive or driver) and the preclear failed.

 

Quote

Feb 14 14:27:53 Mutant0 kernel: ata5: SATA link down (SStatus 0 SControl 300)
### [PREVIOUS LINE REPEATED 2 TIMES] ###
Feb 14 14:28:05 Mutant0 kernel: ata5.00: disabled
Feb 14 14:28:05 Mutant0 kernel: ata5.00: detaching (SCSI 5:0:0:0)
Feb 14 14:30:08 Mutant0 kernel: sd 12:0:0:0: [sdd] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00
Feb 14 14:30:08 Mutant0 kernel: sd 12:0:0:0: [sdd] tag#0 CDB: opcode=0x88 88 00 00 00 00 04 d2 de 68 00 00 00 08 00 00 00
Feb 14 14:30:08 Mutant0 kernel: print_req_error: I/O error, dev sdd, sector 20717660160
Feb 14 14:30:08 Mutant0 kernel: sd 12:0:0:0: [sdd] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
Feb 14 14:30:08 Mutant0 kernel: sd 12:0:0:0: [sdd] tag#0 Sense Key : 0xb [current] 
Feb 14 14:30:08 Mutant0 kernel: sd 12:0:0:0: [sdd] tag#0 ASC=0x0 ASCQ=0x0 
Feb 14 14:30:08 Mutant0 kernel: sd 12:0:0:0: [sdd] tag#0 CDB: opcode=0x88 88 00 00 00 00 04 d2 de 70 00 00 00 08 00 00 00
Feb 14 14:30:08 Mutant0 kernel: print_req_error: I/O error, dev sdd, sector 20717662208

Since these are no media errors, I would recommend you to change the USB port you're using and verify all power and data connections of the hard disk prior to a new test.

Edited February 15, 2020 by gfjardim

[Sour]

thank you so much! Once other drives are done I will re test this one.