Network card (AQN-107) not working

[5252525111]

Hi, so I'm new to Unraid (running a trail right now) and just installed the OS on my old machine. I've spent the last day doing research trying to figure out how to get my network card working.

 

I've attached my diagnostics as that seems to be what everyone recommends. 

 

This is also whats found under Tools>System Devices

 

````

IOMMU group 19:    [8086:1539] 03:00.0 Ethernet controller: Intel Corporation I211 Gigabit Network Connection (rev 03)

 

IOMMU group 20:    [10ec:816e] 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 816e (rev 1a)
[10ec:8168] 04:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 1a)
[10ec:816a] 04:00.2 Serial controller: Realtek Semiconductor Co., Ltd. Device 816a (rev 1a)
[10ec:816d] 04:00.4 USB controller: Realtek Semiconductor Co., Ltd. Device 816d (rev 1a)
[10ec:816c] 04:00.7 IPMI Interface: Realtek Semiconductor Co., Ltd. Device 816c (rev 1a)

 

IOMMU group 22:    [1d6a:07b1] 09:00.0 Ethernet controller: Aquantia Corp. AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion] (rev 02)

````

 

Any help would be greatly appreciated. 

tatooine-diagnostics-20200227-0811.zip

Edited February 27, 2020 by 5252525111
spelling

[JorgeB]

NIC is detected but fails to initialize:

Feb 26 21:00:29 Tower kernel: atlantic: FW kickstart failed
Feb 26 21:00:29 Tower kernel: atlantic: probe of 0000:09:00.0 failed with error -5

 

Maybe a firmware issue?

[5252525111]

Hum... So I've tried to see if I can get a linux distribution of the firmware, but can't seem to figure out how to run or do anything in command. There is no `sudo` `apt` or `yum` and my root account doesn't have permission to execute the sh files

 

Any one have advice on this? 

 

 

[oski]

On 2/27/2020 at 6:09 PM, 5252525111 said:

Hum... So I've tried to see if I can get a linux distribution of the firmware, but can't seem to figure out how to run or do anything in command. There is no `sudo` `apt` or `yum` and my root account doesn't have permission to execute the sh files

 

Any one have advice on this? 

 

 

Have you solved it? I have the same problem.

[5252525111]

@oski

Never figured it out, I ended up buying a used intel card off ebay.