JudyZ Posted March 8, 2020 Share Posted March 8, 2020 (edited) Hi there My array has 9x 4TB data drives and a 5TB parity drive. All disks are SMART error-free, parity is current and find no errors. I'd like to replace the parity drive with a new 6TB pre-cleared drive, and reuse the existing 5TB parity drive as a new data drive. The new 6TB drive is powered up and seen by Unraid. The array is set to not auto-start. Unraid 6.7.2, OS Plus licence Could I: 1) stop the array 2) set the parity drive to none 3) start the array so unraid forgets the 5TB parity drive 4) stop the array 5) assign the new 6TB drive to parity 6) assign the 5TB (ex-parity) drive as a new data drive 7) init/format the new 5TB data drive start the array 9) let parity automatically rebuild 10) check no errors Many thanks, Judy Edited March 8, 2020 by JudyZ solved Quote Link to comment
itimpi Posted March 8, 2020 Share Posted March 8, 2020 The steps are not quite right as you cannot change the parity drive and add a new data drive at the same time. What you want to do is to follow the procedure for Upgrading a parity disk and then when that completes follow the procedure for Adding a data disk using the old parity disk as the one to add. Quote Link to comment
JudyZ Posted March 8, 2020 Author Share Posted March 8, 2020 Thank you - parity is now building on the new 6TB drive When finished, I will add the old 5TB drive as a new data drive. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.