Sukhoi Posted March 31, 2020 Share Posted March 31, 2020 (edited) Hello, I have a ryzen 3600 process on X570m pro 4 motherboard with Mellanox connect X2 10Gbe Sfp+ card for connectivity. The system boots well and connects well. I have directly connected to my windows 10 machine which has the same card. When i transfer small data like 10Gb it works fine. If I use it with lightroom for continuous 10Gbe connection the Unraid server crashes. If I run it with just ethernet it works fine for long duration of time. I tried using different cables and using multiple combinations of either of the ports -- answer is the same-- Server unstable. Am I missing something in setup? Hello, I tried all the options of setting the c-state to disabled on motherboard and running processor with no boost but the answer is same. system freezes. Is there any thing i can do to fix this ? Should I use a different processor? Should I use Different graphics card? will 3700x run without hanging or do you guys have any suggestion of old AM4 processor which may work with same combination? Edited May 8, 2020 by Sukhoi Quote Link to comment
trurl Posted March 31, 2020 Share Posted March 31, 2020 Go to Tools - Diagnostics and attach the complete diagnostics zip file to your NEXT post. Have you tried these Ryzen tweaks? https://forums.unraid.net/topic/46802-faq-for-unraid-v6/?do=findComment&comment=819173 Quote Link to comment
Sukhoi Posted April 8, 2020 Author Share Posted April 8, 2020 Hello, I have DDR4-2666 so set the Dram frequency to DDR4-2666 do you think thats an issue? Quote Link to comment
Sukhoi Posted May 8, 2020 Author Share Posted May 8, 2020 Hello, I tried all the options of setting the c-state to disabled on motherboard and running processor with no boost but the answer is same. system freezes. Is there any thing i can do to fix this ? Should I use a different processor? Should I use Different graphics card? will 3700x run without hanging or do you guys have any suggestion of old AM4 processor which may work with same combination? Quote Link to comment
trurl Posted May 8, 2020 Share Posted May 8, 2020 Why haven't you done this? On 3/31/2020 at 10:46 AM, trurl said: Go to Tools - Diagnostics and attach the complete diagnostics zip file to your NEXT post. Have you done memtest? Quote Link to comment
Sukhoi Posted May 8, 2020 Author Share Posted May 8, 2020 I have done memtest and no issues. As soon as I start the machine it starts parity check and in some time it crashes. I have attached the report as requested. singhmedia-diagnostics-20200508-1453.zip Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.