April 8, 20206 yr Hoping someone here can help i have run a parity check with the write corrections box ticked. Included some screenshots. On the 12-01-2020 5847 Errors were corrected after running the check. On the 12-02-2020 5849 Errors were corrected after running the check. Now i am running it today and its most the way through i am back at 5849 again. My Disk 8 Threw some Smart messages "offline uncorrectable is 8 " and current pending sector is 8 . I just ordered a new one and will pull it out and replace it with a new one once it arrives. my issue is will my array rebuild here properly? I an running this check now i want to make sure my data is correct before i pull the disk out. Anyone about to help out work where these errors are coming from ?
April 8, 20206 yr Author attached is the Diag file. Looks like that Disk that had the errors this morning is throwing read errors now while the parity check is running. Noticing 32 errors so far vault-diagnostics-20200408-1901.zip
April 8, 20206 yr Community Expert Syslog only shows the last check, ideally we wanted to also see the previous ones, but for now you should cancel it and run an extended SMART test on disk8.
April 9, 20206 yr Community Expert Disk is OK for now, but any more errors I would replace it, run a correcting check now, if there are sync errors run another one after that, if there are still sync errors on the 2nd run post new diags (without rebooting).
April 10, 20206 yr Author Second Parity Check completed with 0 errors. Should i bin this disk when my new one arrives or is it ok to keep running it? It is 7 Years old coming up to 8 it kind of is close to end of life back in the old days before i knew about NAS drives.
April 10, 20206 yr Community Expert 20 hours ago, johnnie.black said: but any more errors I would replace it,
Archived
This topic is now archived and is closed to further replies.