RR3XBX Posted April 24, 2020 Share Posted April 24, 2020 Hi, I had this in a different forum section, but i didn't get any further assistance, apart from 1 person. I've set up an Intel Unraid System (6700k, Z170 board, 16GB RAM, RX580 GPU). The problem i'm having is the Windows 10 VM will only be able to output video to a specific output display. (Backup TV works, main TV doesn't). I wanted to set it up as a VR rig in my living room, and before this, it had Windows 10 directly installed on the SSD's and worked with out main television. After instaling unraid, setting the Intel Onboard GPU for unraid and the RX580 to the VM, it refuses to give any display out, unless i plug it into a spare tv in another room, which enables the display output and shows up. Is there something in Unraid to tell it to output a signal regardless of what it's plugged into, or would this be a TV issue (keep in mind, it worked perfectly before, with the same GPU, Same TV, Same cable, Same port). Link to comment
JorgeB Posted April 25, 2020 Share Posted April 25, 2020 Please don't double post, the other post was on the correct forum, likely didn't get much help because it's a very specific question, not because it wasn't seen, but if anyone else has any idea how to help the OP please reply in the original thread. Link to comment
Recommended Posts