cdixon Posted May 29, 2020 Share Posted May 29, 2020 I have an Unraid server that I have had up and running for over three years. A couple of weeks ago, I attempted to run a parity sync but one of the drives (Drive 4) had read errors during the process. I ran a test for the drive but it apparently seems healthy. I deleted all of the corrupt files that I found on the drive and ran the parity sync again but the drive still has read problems during the process. All in all, I have tried everything and don't know what I should do. What should I do to set things back to normal? tower-diagnostics-20200529-1310.zip Quote Link to comment
JorgeB Posted May 29, 2020 Share Posted May 29, 2020 I don't see any errors on the diags posted, but you're using the Marvell controller and they are a known problem on those boards, not surprisingly disk4 is connected there, so first thing would be to stop using, don't connect anything to the first 4 white SATA ports, there are enough Intel ports for all your devices. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.