Pascal_S Posted August 25, 2020 Share Posted August 25, 2020 (edited) Hardware: x99 board (10sata ports) with i7 & gtx1050ti passthrough to plex docker + Marvell 88SE92xx pcie to 4x SATA Port Card. Unraid no longer recognizes my disks that are plugged into the PCIE card. in the bios it recognizes all hdds. If I switch this to Raid 0 or Raid 1, Unraid recognizes the raid disk. But without a raid my unraid doesn't recognize a single one. Deactivating Immou is not an option because I need it. Any Idea? Edited August 25, 2020 by Pascal_S Quote Link to comment
JorgeB Posted August 25, 2020 Share Posted August 25, 2020 This works for some, but even if it works Marvell controllers are not recommended: https://forums.unraid.net/bug-reports/stable-releases/disks-missing-after-upgrading-to-670-r536/?do=findComment&comment=4583 Quote Link to comment
Pascal_S Posted August 25, 2020 Author Share Posted August 25, 2020 (edited) thank you iommu = pt does this command mean that i disable pcie passthrough? Or am I wrong? edit: I don't know what the "soft" setting does but the "iommu=pt" setting only enables IOMMU for devices that are being used for that purpose and disables it for all other devices. This actually sounds like what you might need. right? Edited August 25, 2020 by Pascal_S Quote Link to comment
JorgeB Posted August 25, 2020 Share Posted August 25, 2020 51 minutes ago, Pascal_S said: This actually sounds like what you might need. right? Yes, if it works, it doesn't work for everybody. 1 Quote Link to comment
Pascal_S Posted August 25, 2020 Author Share Posted August 25, 2020 runs perfectly! thank you very much Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.