xdtrammell Posted August 26, 2020 Share Posted August 26, 2020 (edited) I just recently created a parity disk using my array that had data in it already. When the parity creation was finished it said everything was completed successfully but one drive had 2595 errors on completion. I ran an extended smart test after parity creation to verify their is nothing wrong with the disk and that came back as everything good. So I wanted to ask if I should try and RMA this drive before the warranty expires on it, or do you think the drive is okay to use. If the drive is okay to use what is the best way to fix the errors on the device, should I move the data to another disk in the array and remove the drive with the errors on it and run a preclear on it? The drive in question is "WDC_WD100EMAZ-00WJTA0_2YH645AD-20200826-0358 disk2 (sdi)" I am attaching my diagnostics file I have not rebooted the server since the parity creation or extended smart scan because I had seen in other threads more info could be found if it had not been restarted yet. (Diagnostic removed for privacy reasons please request if needed again) Edited August 26, 2020 by xdtrammell Quote Link to comment
JorgeB Posted August 26, 2020 Share Posted August 26, 2020 SMART test passed and attributes look fine, though the previous errors are logged as actual disk errors, I would keep it for now but any more similar errors in the near future replace it. You also need to run a correcting parity check since because of those errors parity won't be 100% correct. 1 Quote Link to comment
xdtrammell Posted August 26, 2020 Author Share Posted August 26, 2020 Just now, johnnie.black said: SMART test passed and attributes look fine, though the previous errors are logged as actual disk errors, I would keep it for now but any more similar errors in the near future replace it. You also need to run a correcting parity check since because of those errors parity won't be 100% correct. Would you recommend me moving the data to another drive and zeroing this drive out? Quote Link to comment
JorgeB Posted August 26, 2020 Share Posted August 26, 2020 IMHO not much point now since there are no bad sectors currently. Quote Link to comment
xdtrammell Posted August 26, 2020 Author Share Posted August 26, 2020 Okay thanks for the info, I am about to go to sleep I will rerun the parity check when I wake up. Would running the parity check with this box checked do what you are recommending? Quote Link to comment
JorgeB Posted August 26, 2020 Share Posted August 26, 2020 Yes, since a few errors are expected. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.