R3nFoly Posted November 22, 2020 Share Posted November 22, 2020 (edited) Hello Guys I'm trying to create VMs and I always get the 0x80070570 during the copy of the Windows. I already downloaded the ISO multiple times, different ISO's, different versions of windows 7/10/2016/2019 I'm using the 6.9.0 beta30 (due the last version didn't have the drivers for my network card). This error is really annoying me. Thanks, guys. UPDATE - Patriot Viper 4 Steel Series DDR4 32GB(2 x 16GB) 3600MHz Kit Faulty, RMA Started, as soon I replace the Memories, I'll update here again. Edited November 29, 2020 by R3nFoly [SOLVED] Quote Link to comment
R3nFoly Posted November 22, 2020 Author Share Posted November 22, 2020 r-unr-diagnostics-20201122-2126.zip Quote Link to comment
R3nFoly Posted November 22, 2020 Author Share Posted November 22, 2020 I don't know what to do anymore, thinking to format the flash drive and install everything again. Quote Link to comment
R3nFoly Posted November 22, 2020 Author Share Posted November 22, 2020 Maybe this help, but have zero idea about how to fix. -blockdev '{"driver":"file","filename":"/mnt/user/domains/W7/vdisk1.img","node-name":"libvirt-3-storage","cache":{"direct":false,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-3-format","read-only":false,"cache":{"direct":false,"no-flush":false},"driver":"raw","file":"libvirt-3-storage"}' \ -device virtio-blk-pci,bus=pci.0,addr=0x5,drive=libvirt-3-format,id=virtio-disk2,bootindex=1,write-cache=on \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/Windows 7 Todas as Versões 7 SP1 Outubro 2017 X64.ISO","node-name":"libvirt-2-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-2-format","read-only":true,"driver":"raw","file":"libvirt-2-storage"}' \ -device ide-cd,bus=ide.0,unit=0,drive=libvirt-2-format,id=ide0-0-0,bootindex=2 \ -blockdev '{"driver":"file","filename":"/mnt/user/isos/virtio-win-0.1.189-1.iso","node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}' \ -blockdev '{"node-name":"libvirt-1-format","read-only":true,"driver":"raw","file":"libvirt-1-storage"}' Quote Link to comment
R3nFoly Posted November 24, 2020 Author Share Posted November 24, 2020 OK. What I did to fix was. I downgraded from 6.90 beta30 to 6.8.3. Installed the usb-ethernet and I'm able to create all the VM's now. I know is a beta, but a warning would be nice. Thanks all. Quote Link to comment
R3nFoly Posted November 28, 2020 Author Share Posted November 28, 2020 So, updating. Still same error. I replaced the cache drive, create the default shares again. replaced the PSU. Still no go. All the dockers work fine, I just can't create any VM. I have no idea what to do now guys, can someone give me a help. Quote Link to comment
R3nFoly Posted November 28, 2020 Author Share Posted November 28, 2020 I even already tried to install direct to an ssd and vnme passtrough, all with the same error during the instalation. I'm writing my iso file to a usb now, going to install from the usb. Quote Link to comment
R3nFoly Posted November 28, 2020 Author Share Posted November 28, 2020 OK, update, same error installing over the flashdrive, download straigh from MS. Quote Link to comment
R3nFoly Posted November 28, 2020 Author Share Posted November 28, 2020 r-unr-diagnostics-20201128-1932.zip Quote Link to comment
jonp Posted November 30, 2020 Share Posted November 30, 2020 FYI, through email correspondence with this user, it turned out to be that their memory (RAM) had died on them. Replacement memory resolved the issue. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.