[6.11] Upgrade from 6.11.RC5 and system keeps crashing after a few hours, while my second system is Stable on 6.11

Enable the syslog server on v6.11 and post that after a crash together with the complete diagnostics.

Thanks for the info.
Will try 6.11 rc5 for a few days (to see if it stay stable) and then go back on 6.11 and get the logs .

hi

 

ok got the system back on 6.11 , hasn't frozen (YET), but now i got a new weird bug .

the array need s to rebuild the parity, it work until it get a to a point.
did the first 3.5 TB at 120mb/s .. now its crawling at 130kb/s

 

Total size:8002 GB

Elapsed time:1 day, 4 hours, 30 minutes

Current position:3534 GB (44.2 %)

Estimated speed:198.3 KB/sec

Estimated finish:260 days, 17 hours, 16 minutes

 

i have included the logs in at the time of this post

 

 

 

towerhp-diagnostics-20221002-0006.zip

Hi

the towerhp.local is on 6.11 since saturday morning , at my 3rd reboot/ restart since.

 

my other nas .. 0 zero problem

 

The system keeps freezing where i have to turn off and on the device .

 

i keep getting this on towerhp.local

 

 

i have included the logs , if anyone can see what the problem is .

 

Thanks

 

towerhp-syslog-20221003-1148.zip towerhp-diagnostics-20221003-1148.zip

Syslog from the diags starts over after every boot, that's why I asked for the log from  the syslog server, it might catch something.

 

Most likely unrelated to the problem but after boot disk4 is already showing what look like connection issues, replace the SATA cable.

activated syslog on my good nas to capture the logs from the bad nas

 

Hi

you might of hit the jackpot with my "drive4" , replaced the cable and swap the drive with a known good drive and it started showing errors, removed the 2 port controller card and the system hasn't Frozen yet .

 

Thanks