[6.8.1] Dashboard Airflow with System Autofan Not Installed

There is no relation between the dashboard and the plugin.

 

When fans are present these are all displayed in the dashboard.

 

Did you install and uninstall the Dynamix plugin? Try a reboot to see if things are cleaned up.

Edited February 1, 2020 by bonienl

Sorry a little confused by your response.  The dashboard will show the Airflow section regardless of the plugin being installed if fans are present in the system?  I used to have the plugin installed but it's been gone for over a month.  Multiple reboots since then.

What is the output of

sensors -uA

 

23 hours ago, bonienl said:

What is the output of

sensors -uA

 

 

Quote

root@BEAST-BACKUP:~# sensors -uA
power_meter-acpi-0
power1:
  power1_average: 4294967.295
  power1_average_interval: 4294967.295

acpitz-acpi-0
temp1:
  temp1_input: 27.800
  temp1_crit: 119.000
temp2:
  temp2_input: 29.800
  temp2_crit: 119.000

nct6776-isa-0290
Vcore:
  in0_input: 0.000
  in0_min: 0.000
  in0_max: 1.744
  in0_alarm: 0.000
  in0_beep: 0.000
in1:
  in1_input: 0.136
  in1_min: 0.000
  in1_max: 0.000
  in1_alarm: 1.000
  in1_beep: 0.000
AVCC:
  in2_input: 3.376
  in2_min: 0.000
  in2_max: 0.000
  in2_alarm: 1.000
  in2_beep: 0.000
+3.3V:
  in3_input: 3.360
  in3_min: 0.000
  in3_max: 0.000
  in3_alarm: 1.000
  in3_beep: 0.000
in4:
  in4_input: 0.496
  in4_min: 0.000
  in4_max: 0.000
  in4_alarm: 1.000
  in4_beep: 0.000
in5:
  in5_input: 1.856
  in5_min: 0.000
  in5_max: 0.000
  in5_alarm: 1.000
  in5_beep: 0.000
in6:
  in6_input: 1.696
  in6_min: 0.000
  in6_max: 0.000
  in6_alarm: 1.000
  in6_beep: 0.000
3VSB:
  in7_input: 3.392
  in7_min: 0.000
  in7_max: 0.000
  in7_alarm: 1.000
  in7_beep: 0.000
Vbat:
  in8_input: 3.152
  in8_min: 0.000
  in8_max: 0.000
  in8_alarm: 1.000
  in8_beep: 0.000
fan1:
  fan1_input: 0.000
  fan1_min: 0.000
  fan1_alarm: 0.000
  fan1_beep: 0.000
  fan1_pulses: 2.000
fan2:
  fan2_input: 0.000
  fan2_min: 0.000
  fan2_alarm: 0.000
  fan2_beep: 0.000
  fan2_pulses: 2.000
SYSTIN:
  temp1_input: 0.000
  temp1_max: 0.000
  temp1_max_hyst: 0.000
  temp1_alarm: 0.000
  temp1_type: 4.000
  temp1_offset: 0.000
  temp1_beep: 0.000
CPUTIN:
  temp2_input: -61.500
  temp2_max: 80.000
  temp2_max_hyst: 75.000
  temp2_alarm: 0.000
  temp2_type: 4.000
  temp2_offset: 0.000
  temp2_beep: 0.000
AUXTIN:
  temp3_input: -13.500
  temp3_max: 80.000
  temp3_max_hyst: 75.000
  temp3_alarm: 0.000
  temp3_type: 4.000
  temp3_offset: 0.000
  temp3_beep: 0.000
PCH_CHIP_TEMP:
  temp7_input: 0.000
PCH_CPU_TEMP:
  temp8_input: 0.000
PCH_MCH_TEMP:
  temp9_input: 0.000
intrusion0:
  intrusion0_alarm: 0.000
  intrusion0_beep: 0.000
intrusion1:
  intrusion1_alarm: 0.000
  intrusion1_beep: 0.000
beep_enable:
  beep_enable: 0.000

coretemp-isa-0000
Package id 0:
  temp1_input: 36.000
  temp1_max: 80.000
  temp1_crit: 100.000
  temp1_crit_alarm: 0.000
Core 0:
  temp2_input: 31.000
  temp2_max: 80.000
  temp2_crit: 100.000
  temp2_crit_alarm: 0.000
Core 1:
  temp3_input: 36.000
  temp3_max: 80.000
  temp3_crit: 100.000
  temp3_crit_alarm: 0.000

 

There are two fan entries reported in the list, this is the reason the fans section is present on the dashboard.

20 hours ago, bonienl said:

There are two fan entries reported in the list, this is the reason the fans section is present on the dashboard.

I see.  So is it safe to assume that everyone system will have that section on the dash since I'd assume every system has fan sensors?

3 hours ago, IamSpartacus said:

I see.  So is it safe to assume that everyone system will have that section on the dash since I'd assume every system has fan sensors?

Assuming the correct drivers are installed, then yes, fans will appear.