ThorThe1

I had no idea what I had for the docker container (folder or img file). I ended up deleting the docker img through the docker menu settings but that did not remove the files off of disk 10 which the mover tried to move, but also said it didn't exist. The 2 pools that I had for VMs I was misusing. I was not understanding the difference between the pools/cache to hold the VM vs using unassigned devices to store the OS/VM on the drives directly. *** That's why the domains and isos folder was also configured wrong. *What I did to correct everything was: Delete all the files from Disk 10 that the mover was trying to move. I read some user forums and found out how to delete files without using an application/docker program. In terminal: rm -rf /path/to/dir Example: rm -rf /mnt/user/system/libvirt Moved all the files that the mover would not move from the domain and isos shares. I read that you should only move/copy files and folders from user share to user share OR disk to disk. In terminal: mv /path/to/dir /path/to/dir Example: mv /mnt/cache-main/domain /mnt/disk12/ After all that I was able to clean up how the cache drive acted, and I moved my VMs to run on the storage device directly (through unassigned devices). Thank you all for the help!!

It was the services.

thetower-diagnostics-20220616-2308.zipHere it is. I've tried "YES" and "PREFER" and had the dockers, and vms disabled before invoking the mover and it still never moves the files.

Hoping to find someone that would help me figure out why the mover is saying there are no files in the location it's trying to move.

Hello everyone, If someone can help me out, I would be so thankful! Below is a screen shot of the mover trying to move files/folder from a location that it says does not exist. I've deactivated docker and VMs. system log Cache Disk 10 User Shares

That’s a good point Frank1940! I’ll have to test that out when I have time to observe it.

Here's an update! My parity check returned no issues at all. It looks like there were a couple issues here. HEAT I added a high speed filtered box fan to push air through my server. Then added an industrial fan to circulate the air around the garage (no way to air condition the garage and to expensive right now). My server seemed fine for a few days. . . then random shut downs started happening again. Previously, my drives, motherboard and other components were pushing 40-60 degrees Celsius before I added the fans (now 30-40's max). So I figured that was not the issue anymore. Power I was on my gaming pc one day and my internet went out. So I went down stairs and it looked like my server also reset itself. The only common factor that my server has with my networking equipment is the Back-up APC that is powering both of them and my mac-pro. I unplugged everything from the APC taking it out of the loop. Ever since I did that I have had no issues. The APC unit was from Good Will and worked fine for about 5 months. Looks like I will have to get new one. But this time, I'll have one for each one of my systems to limit the stress on the APC.

I'm waiting on it to finish the parity check now. I ended up installing a high pressure fan in the case to see if the issue is overheating. So far it has not rebooted, yet. I'll post again in a week to see if the heat was the issue.

Here we go! Zip file posted. Ok, I'll check out the wiki on persistent logs. thetower-diagnostics-20210605-1335.zip

Trurl, Thank you for your reply! Ok, so how do I go about looking in to something like that? Are there specific logs that I need to look at? If I look at the "System Logs" I'm not really sure on what I'm looking at. They system was running about ~4 hours before I downloaded these (going off of the "up-time" counter). Attached is the sys logs I downloaded. syslog.txt

Almost every week my Unraid server reboots. The only time I find out is if I log in and see that an unscheduled parity check was started and the server "up-time" was reset. I'm not sure what someone needs from me to help diagnose the issue. But it would be much appreciated if someone could guide me in finding out.

Ok, so do you mean you bought a new OEM version like mine (9217-4i4e)? If so, that's great! Please let me know how it goes!!

Hello everyone! I'm really new to flashing SAS cards. I received this card from my brother for free. He bought it and couldn't get it to work and it is past the return window. I was wondering how to flash this one to I.T Mode. Everything I search just has people talking about buying an already flashed card. Or just getting a different model. I'm not looking to buy another card. I can live without this, but it would be pretty awesome to get it to work to pool JBOD LSI SAS9217-4i4e - HP If anyone has leads for this, I would be very grateful!

Hello everyone, I've had Unraid for a few months now running on my i7-3770K. It's been great, but i'm looking to take that MOBO and CPU out and give it to one of my brothers. I recently got a used 2009/10 MAC Pro. I was planning on stripping the ram and the dual CPUs from it and putting them into a MOBO that is compatible with them and UNRAID. My budget is $100 for the MOBO because I still would need heatsink/fans, and possibly a newer power supply. Below is what I currently have. I also attached a SPEC sheet of the PC. CPU: 2 x Intel Xeon X5570 - Gainestow @ 2.93GHz RAM: 32.0GB Triple-Channel DDR3 @ 531MHz (7-7-7-20) = 8 x 4GB Found this board and it looks like it will me what I want. Can anyone tell me if this MOBO would work with unraid? I've heard that people have a lot of issues with HP boards. 591182-001 HP Z800 Workstation Motherboard Dual LGA 1366 460838-003 https://www.ebay.com/itm/591182-001-HP-Z800-Workstation-Motherboard-Dual-LGA-1366-460838-003/402058150179?epid=5009502381&hash=item5d9c888123:g:wJgAAOSw3EteMgDr:sc:FedExHomeDelivery!60435!US!-1#viTabs_0 I appreciate any help I can get. Thank you,