[(SOLVED)6.9.0 + 6.9.1 + 6.9.2 NetApp PMC-Sierra PM8003 REV.5 and Adaptec 6805H HBA Controller didn't find the hdd's]

thats sad....

@limetechwill there be a solution for the issue?

[(SOLVED)6.9.0 + 6.9.1 + 6.9.2 NetApp PMC-Sierra PM8003 REV.5 and Adaptec 6805H HBA Controller didn't find the hdd's]

got directed to this thread by @JorgeB - thx mate.

 

Same issue here with an Adaptec 6805H HBA. 6.9.2 not working with that failure in the log:

 

pm80xx0:: pm8001_pci_probe  1107:chip_init failed [ret: -16]

Reverted back to 6.8.3 right now...

[[6.9.0][6.9.1] Disks on second HBA card not listed]

ok, found the issue myself....driver not working for it.

Log says: 

 

pm80xx0:: pm8001_pci_probe  1107:chip_init failed [ret: -16]

...so have to change hardware, or wait for a new driver or roll back

[[6.9.0][6.9.1] Disks on second HBA card not listed]

hey, I have the same issue with my Adaptec 6805H HBA.

Works flawlessly in 6.8.3, but if I update to 6.9.2, all drives connected to it, are gone (which is basically my hole array).

 

The controller is still recognized - see attached file. If I revert back, the drives are there again.

 

Under /etc/modprobe.d/ I have the mpt3sas.conf, which already contains the max_queue_depth=10000.

Any other idea? :(