Fozzie

I do have a UPS (unsure how to test) Did work on other outages so not sure why this one didn't. Here is my diagnostic file and smart file. Fix common erros came back clean. tower-diagnostics-20240223-1035-maintenance mode.zip tower-diagnostics-20240223-1107-restart.zip tower-smart-20240223-1109.zip

Thank you and Thank you very much.

I have tried a lot of the suggestions to no avail My server boots and I can login but getting a localhost error. Tried downloading backup from unraid connect still nothing. Any help would be appreciated. tower-diagnostics-20230716-1508.zip

I had an unclean shut down yesterday even thought I had a ups. Now I have 2 unmountable disks, I have enclosed a before diag and an after. Some assistance would be appreciated. tower-diagnostics-20210726-2139.zip tower-diagnostics-20210928-1533.zip

Love the app but unable to get TV Show library to show in it. Tried TV Shows, TV_Shows, TV, Shows. Any ideas?

Tried the mount but got this back: wrong fs type, bad option, bad superblock on /dev/sdi1, missing codepage or helper program, or other error. Included new diagnostic below tower-diagnostics-20210506-1848.zip

At first I was having network issues but then I fixed with new motherboard and cpu now I am having disk issues 2 are not mounting I only have one parity drive need the data on both.

I am having serious issue with Unraid server Don't want to loose data please help or let me know how to recover data. Also need to know how to mark previous topic as solved. Thanks for assistance tower-diagnostics-20210505-1842.zip

ok, thanks.

O.K, thanks looking to go with an AMD processor and motherboard. Will this work?

My network keeps dropping every few days and sometimes overnight. Any help would be appreciated. Everything on the network works fine except can't connect to tower. I am in GUI mode and server looks fine but eth0 port shows down sometimes. tower-diagnostics-20210501-2157.zip

Errors Found Unable to write to disk2 Drive mounted read-only or completely full. Please help. tower-diagnostics-20201224-1812.zip

Ok, changing to new computer with 6 sata ports and have an IO CREST M.2 22x42 to SATA III 2 Ports Adapter Card on the way. That should be enough to hold all my drives. Once I upgrade to 10tb drives. Correct?

Usually 5-7 days

All are on usb enclosure. I am just thinking about increasing the drives and connection to the motherboard.

Not sure I understand what you mea when you say "separate connection for each disk" do you enclosure or disks inside enclosure?

Will pcie to esata card work?

My case only holds 6 drives how would I increase drive space?

Syba 4-port SATA III PCIe 2.0 Controller Card. Some thing like this?

Sorry just learning this stuff what is HBA? This is the new motherboard I am planning on using. Does this help? 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. 1 x PCI Express x16 slot, running at x4 (PCIEX4) * The PCIEX4 slot shares bandwidth with the SATA Express connector. When the SATA Express connector is populated, the PCIEX4 slot operates at up to x2 mode. 2 x PCI Express x1 slots (All of the PCI Express slots conform to PCI Express 3.0 standard.) 2 x PCI slots

I understand, what do you suggest? Can I take them out and put into 2 other servers and save the information? I have 13 disks.

My server is running really slow and started a new parity check after reboot, when parity was good before. Can someone help. Please.tower-diagnostics-20201213-1213.zip

Sorry didn't see that. Here is the diag wattstower-diagnostics-20200425-1417.zip

I built a new server with a smaller cpu and same drives. Getting cpu usage at 100% most of the time. I have included my diagnostic. Any help would be greatly appreciated. wattstower-syslog-20200425-1804.zip