Mkultra
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Mkultra
-
-
I have the same problem! anyone figured out a way to fix this?
I've tried smartctl '-A /dev/sdX' and i get a message back telling me smart status is enabled.. however when i go into the hdd settings it tells me this:
SMART support:Available - device has SMART capability.
SMART support:Disabled
Very confused!
-
Ok Thankyou! WIll try all of these!
-
Hi Guys
First post here and i wish it could be more positive.
Literally trawled these forums for days for help. I've been having extremly slow read and write speeds on my array since moving to unraid(Often below 1MBps). I've run a freenas server in the past but im completely lost as to what my problem is, Cant see what im missing.
Im running a 2TB WD Red as parity as well as a identical drive and a 1TB WD black in the array, I also have an ocz SSD which i am using as cache. The server is hooked up directly to the router which supports 1000MB transfer speeds which a CAT6 cable.
I've included my diagnostics in the post and below is an iperf test I've run over wifi. Can include a test done over ethernet but its honestly not much better.
Literally any help would be appreciated!! Thanks
Connecting to host 192.168.1.121, port 5201
[ 4] local 192.168.1.60 port 54527 connected to 192.168.1.121 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 730 KBytes 5.95 Mbits/sec
[ 4] 1.00-2.00 sec 1.32 MBytes 11.1 Mbits/sec
[ 4] 2.00-3.00 sec 197 KBytes 1.62 Mbits/sec
[ 4] 3.00-4.00 sec 1.02 MBytes 8.52 Mbits/sec
[ 4] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec
[ 4] 5.00-6.00 sec 20.0 KBytes 163 Kbits/sec
[ 4] 6.00-7.00 sec 54.2 KBytes 446 Kbits/sec
[ 4] 7.00-8.00 sec 551 KBytes 4.51 Mbits/sec
[ 4] 8.00-9.00 sec 701 KBytes 5.75 Mbits/sec
[ 4] 9.00-10.00 sec 705 KBytes 5.75 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 5.23 MBytes 4.38 Mbits/sec sender
[ 4] 0.00-10.00 sec 5.14 MBytes 4.31 Mbits/sec receiver
No HDD temps after installing 6.9.0-rc1
in General Support
Posted
Tried RC1 and couldnt get any hdd temps.. Tried RC2, now getting hdd temps when spinning up/down the drives on array but can get no temp on either the cache or flash.
Cannot get SMART enabled on cache either. restoring to 6.8 for now.