Shalmi
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Shalmi
-
-
@JorgeBa lil late now and will hopefully lead to less stress on the controller....and hopefully wont break on me again. Good to know though
-
ps if you have the power to edit the document. I think it should say hit "sync" instead of "start" in step 8
Rebuild Started
-
@JorgeB
Thank you. going to try that now in maintenance mode following those steps. Will report back if there is an issue or if all goes well -
-
@JorgeB
Right now 2 drives are showing as emulated (pic attached)....which is concerning cuz only one should be.
1. Should I still start the array in this state?
2. What risk do I have of losing any of this data?3. Should I start normally or in maintenance mode?
4. Should i be concerned that it no longer says something about repairing sdg next to the start button?
Sorry for all the questions
-
New one attached. Thank you for the quick response @JorgeB
9 minutes ago, JorgeB said:Diags posted appear to be before the issues, there's no rebuild or missing disks.
-
-
I have 6 drives in my array (2 as parity)
Last night I started getting multiple errors like so
QuoteUnraid: Warning [UNRAID] - raw read error rate (failing now) is 11131
WDC_WUH721414ALE6L4_X0GDN9ZC (sdg)This was the SMART on that drive today before replacing the drive
Quotesmartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.1.74-Unraid] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar DC HC530
Device Model: WDC WUH721414ALE6L4
Serial Number: X0GDN9ZC
LU WWN Device Id: 5 000cca 297c5c0bd
Firmware Version: LDGNW240
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5577
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Mar 28 19:13:54 2024 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1571) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 15
2 Throughput_Performance P-S--- 103 103 054 - 225
3 Spin_Up_Time POS--- 090 090 001 - 215 (Average 215)
4 Start_Stop_Count -O--C- 100 100 000 - 68
5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0
7 Seek_Error_Rate PO-R-- 100 100 001 - 0
8 Seek_Time_Performance P-S--- 133 133 020 - 18
9 Power_On_Hours -O--C- 096 096 000 - 32336
10 Spin_Retry_Count PO--C- 100 100 001 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 67
22 Helium_Level PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 093 093 000 - 51223
193 Load_Cycle_Count -O--C- 093 093 000 - 51223
194 Temperature_Celsius -O---- 057 057 000 - 37 (Min/Max 21/50)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warningGeneral Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x2f GPL R/O 1 Set Sector Configuration
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data TransferSMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors LoggedSMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 31855 -
# 2 Short offline Completed without error 00% 20141 -
# 3 Extended offline Completed without error 00% 248 -
# 4 Extended offline Interrupted (host reset) 90% 219 -
# 5 Extended offline Aborted by host 90% 219 -
# 6 Short offline Completed without error 00% 207 -SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 37 Celsius
Power Cycle Min/Max Temperature: 32/44 Celsius
Lifetime Min/Max Temperature: 21/50 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
Minimum supported ERC Time Limit: 65 (6.5 seconds)SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (91)Index Estimated Time Temperature Celsius
92 2024-03-28 17:06 36 *****************
... ..( 6 skipped). .. *****************
99 2024-03-28 17:13 36 *****************
100 2024-03-28 17:14 37 ******************
... ..( 4 skipped). .. ******************
105 2024-03-28 17:19 37 ******************
106 2024-03-28 17:20 38 *******************
... ..( 3 skipped). .. *******************
110 2024-03-28 17:24 38 *******************
111 2024-03-28 17:25 37 ******************
... ..( 13 skipped). .. ******************
125 2024-03-28 17:39 37 ******************
126 2024-03-28 17:40 36 *****************
... ..( 2 skipped). .. *****************
1 2024-03-28 17:43 36 *****************
2 2024-03-28 17:44 37 ******************
... ..( 3 skipped). .. ******************
6 2024-03-28 17:48 37 ******************
7 2024-03-28 17:49 38 *******************
... ..( 8 skipped). .. *******************
16 2024-03-28 17:58 38 *******************
17 2024-03-28 17:59 37 ******************
... ..( 18 skipped). .. ******************
36 2024-03-28 18:18 37 ******************
37 2024-03-28 18:19 38 *******************
... ..( 10 skipped). .. *******************
48 2024-03-28 18:30 38 *******************
49 2024-03-28 18:31 37 ******************
... ..( 17 skipped). .. ******************
67 2024-03-28 18:49 37 ******************
68 2024-03-28 18:50 38 *******************
... ..( 10 skipped). .. *******************
79 2024-03-28 19:01 38 *******************
80 2024-03-28 19:02 37 ******************
... ..( 6 skipped). .. ******************
87 2024-03-28 19:09 37 ******************
88 2024-03-28 19:10 36 *****************
89 2024-03-28 19:11 36 *****************
90 2024-03-28 19:12 37 ******************
91 2024-03-28 19:13 37 ******************SCT Error Recovery Control:
Read: Disabled
Write: DisabledDevice Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 67 --- Lifetime Power-On Resets
0x01 0x010 4 32336 --- Power-on Hours
0x01 0x018 6 35228672625 --- Logical Sectors Written
0x01 0x020 6 115181205 --- Number of Write Commands
0x01 0x028 6 1727640367312 --- Logical Sectors Read
0x01 0x030 6 2240747560 --- Number of Read Commands
0x01 0x038 6 116410495500 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 18435 --- Spindle Motor Power-on Hours
0x03 0x010 4 18435 --- Head Flying Hours
0x03 0x018 4 51223 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 481484 --- Read Recovery Attempts
0x03 0x030 4 1 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x04 0x018 4 0 --- Physical Element Status Changed
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 37 --- Current Temperature
0x05 0x010 1 35 N-- Average Short Term Temperature
0x05 0x018 1 35 N-- Average Long Term Temperature
0x05 0x020 1 50 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 48 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 42 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 338 --- Number of Hardware Resets
0x06 0x010 4 68 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized valuePending Defects log (GP Log 0x0c)
No Defects LoggedSATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 9 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FISI ordered a new Drive to replace it and it came in. I turned off the machine. Unplugged that drive, replaced it with an equivalent size and turned the machine back on. I then selected that drive to replace it in the array and hit start.
QuoteDisk 1, is being reconstructed and is available for normal operation
WDC_WD142KFGX-68AFPN0_5MG0VBRJ (sdg)
It said it would take about 2 days to repopulate the data on that drive and then I started getting these errors:
QuoteUnraidBot, [Mar 28, 2024 at 9:00:01 PM]:
Unraid: Alert [UNRAID] - Disk 1 in error state (disk dsbl)
WDC_WD142KFGX-68AFPN0_5MG0VBRJ (sdg)Unraid: Alert [UNRAID] - Disk 2 in error state (disk dsbl)
WDC_WD101KRYZ-01JPDB1_2YHTGB5D (sdf)Unraid: Warning [UNRAID] - array has errors
Array has 6 disks with read errors
Parity disk - WDC_WUH721414ALE6L4_X0GEHD9C (sdb) (errors 263)
Disk 1 - WDC_WD142KFGX-68AFPN0_5MG0VBRJ (sdg) (errors 826)
Disk 2 - WDC_WD101KRYZ-01JPDB1_2YHTGB5D (sdf) (errors 1587)
Disk 3 - WDC_WUH721414ALE6L4_9LG5SM2A (sde) (errors 263)
Disk 4 - WDC_WD141KRYZ-01C66B0_9LJ0785G (sdc) (errors 295)
Parity 2 - WDC_WUH721414ALE6L4_9JG0WHRG (sdd) (errors 263)I panicked and stopped the array. Then I saw the uploaded image attached where multiple drives are stated as missing.
What do I do. I have Loads of data I do not wanna lose (hence the 2 parity drives). Someone help
-
Bumppp
how is this still not a feature 😩
-
I bought a license to solid works and can not install it because it keeps recognizing that I am in a vm.
I followed this blog and tried to edit my xml but was still getting the same error
I then tried to just pull the raw disk image and run it on VMware fusion on my laptop which is approved(?) but fusion wouldn’t let me import the img file or the vmdk I converted it into using qemu-img
what am I missing here?
has anyone gotten this to work in anyway?
-
On 9/21/2020 at 5:14 PM, Shalmi said:
I have been using authelia happily for a while now.
I have it setup with duo as well for 2fa, but I have noticed that I can NOT get it to keep me logged in.
in the config I set:
# The time in seconds before the cookie expires and session is reset.
expiration: 2w
# The inactivity time in seconds before the session is reset.
inactivity: 2w
Is there more I have to do so I am not relogging in every day
Has anyone else figured out how to get "remember me" to work?
-
I have been using authelia happily for a while now.
I have it setup with duo as well for 2fa, but I have noticed that I can NOT get it to keep me logged in.
in the config I set:
# The time in seconds before the cookie expires and session is reset.
expiration: 2w
# The inactivity time in seconds before the session is reset.
inactivity: 2w
Is there more I have to do so I am not relogging in every day
-
Back again, I realized that my authelia container starts up faster than my mariadb container and then errors out and stops.
Would it be possible to have the authelia container continue to attempt to connect to mariadb without just stopping?
-
Just wanted to come back and say that I got it working! 2fa and all! Thanks for the great app!
-
On 8/7/2020 at 6:19 PM, Sycotix said:
Have you tried checking your database installation? Are you using a database?
I was banging my head against the wall when I ran into the same issue as that user. I did not realize there was a config file that needed to be configured before the application would start.
You may want to put that in the description with a link to the readme as well as in the error messages that pop up if you try to run the container without setting up the file.
Gonna go try and configure this. Thanks for the nice instructions on your github. Seems like you put a lot of work into this.
unRAID API
in Feature Requests
Posted
BUMP