inamak

The cloudcmd guy responded to your comment on github

Hi - with the latest cloudcmd i am not getting any logs and the appdata directory is empty? I also get an error if i try to change any settings in the interface dialog? Any ideas? Also where is the config file stored?

The creator has fixed the crash and updated the docker ?

Actually I'm still getting issues with 8.5.0. Just tried moving a directory of files from one drive to another and it crashed out before finishing. Also if I try changing settings it gives an error - seems the appdata directory is empty? I have logged an issue on github with my error log for the crash part.

Great yes I updated yesterday. If anyone has issues after update make sure you clear your browser cache. Cheers!

Cool thanks

Hey - any update on getting this to 8.5.0? I tried a force update and also tried recreating the container but it is still 8.4.0 Cheers!

Ok great thanks. I was just about to ask you to update to 8.5.0 as I read about the 8.4.0 issue earlier. Cheers!

Hi - I just updated to the latest cloud commander and none of the buttons at the bottom work for me? They were working fine in the version I was running before, so not sure whats happened. I've tried redeploying the image but it didnt help. Any ideas? EDIT - I just tried it in chrome and it works there so its an issue in firefox. hmmm.... EDIT 2 - Actually just tried moving a file in chrome and it caused the docker to exit. Think there is an issue with 8.4.0

Ok so I did the correcting parity check - screenshots of the results attached. For the parity disk, the errors reported on the unraid main page increased, but the smart report pending sectors decreased. I reckon I should change this based on this result even though the pending went down as it still has quite a few - opinions? For disk6, the reallocated sectors has remained steady at 6, so I think I will just monitor that for now - right thing to do? Cheers! inamak

thanks for the speedy responses guys - i'll run a correcting parity check to see if that helps, but i think ill also buy another drive anyway as i feel i will be better off swapping it out lets see what happens with disk6 - ill let you know the results cheers!

Hi - been using unraid 5.0-rc16c for a while with no issues - recently noticed the parity drive has errors according to the main page (see attached) Ran the myMain smart view (see attached) and the parity drive does have pending sectors. also see a potential issue with disk 6. Should i replace the parity drive asap? What about disk 6? any advice much appreciated thanks, inamak

Hi - Sorry for reviving an old thread but I am having trouble getting Spotweb to work with CP CP successfully uses the api to search for a movie, but when it tries to get the nzb I get the following error: 06-02 11:31:19 INFO [hpotato.core.plugins.base] Opening url: http://tower:81/spotweb/api?t=get&id=sPzymRpkcvsWoeoUQT7r6%40spot.net&apikey=xxx, params: [] 06-02 11:31:19 ERROR [ore.providers.nzb.newznab] Failed download from tower: Traceback (most recent call last): File "/usr/local/couchpotato_v2/couchpotato/core/providers/nzb/newznab/main.py", line 141, in download data = self.urlopen(url, show_error = False) File "/usr/local/couchpotato_v2/couchpotato/core/plugins/base.py", line 148, in urlopen response = urllib2.urlopen(request, timeout = timeout) File "/usr/lib/python2.6/urllib2.py", line 126, in urlopen return _opener.open(url, data, timeout) File "/usr/lib/python2.6/urllib2.py", line 397, in open response = meth(req, response) File "/usr/lib/python2.6/urllib2.py", line 510, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python2.6/urllib2.py", line 429, in error result = self._call_chain(*args) File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 605, in http_error_302 return self.parent.open(new, timeout=req.timeout) File "/usr/lib/python2.6/urllib2.py", line 397, in open response = meth(req, response) File "/usr/lib/python2.6/urllib2.py", line 510, in http_response 'http', request, response, code, msg, hdrs) File "/usr/lib/python2.6/urllib2.py", line 435, in error return self._call_chain(*args) File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 518, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) HTTPError: HTTP Error 401: Unauthorized If I manually use the same url (substituting the xxx with the api key) in my browser the nzb comes up. I switched CP to debug mode to check it was using the api key correctly and it is. Any ideas???

Hi - I am also getting this same issue 'bad download, deleting' on all plugins Is there a fix for this? I'm running 5.0-rc8a EDIT - Installed all manually and worked fine.

So I got the new PSU today and installed it just now - server booted without issue! Yay! Unraid is doing a parity check but looking good so far...

Hey - getting a new nic sorted this! Cheers

Cheers for the info - yes i have had a psu go in the past and take the mobo with it - just hoping it is not the case here - will be even more costly! Fingeres crossed it all just works when the new psu arrives...

Hi all - I'm running with 7 HDDs and did have an Antec HE 430W PSU - i was just watching a tv ep off the server and the PSU started sparking like crazy and smoking! Looks like it has burned itself out, and the rest of the server looks *ok*. The only thing i can think of doing now is getting a new PSU and hoping the rest of the server is ok. Anyone had this happen before? I'm not sure why it happened i've been running the server for a few months without issue. Is there any process i should go through? Or just replace the PSU and boot as normal? Thanks! EDIT - just ordered a Corsair 650w - wanted some decent headroom. Lets hope the rest of the rig is ok!

Hi all - i'm running 5.0 rc5 and i get freezes all the time when playing video over the network - especially on 1080p. If i just copy and play the files locally there is no issue, and pinging the unraid server produces no dropped packets. Looking at the syslog it seems the NIC is hanging a lot causing this problem. I'm using a P5W DH Deluxe mobo which has the Marvell 88E8053 Gigabit LAN Controller. Is that onboard NIC just no good? Should i just get a pcie Intel NIC? Or is there a solution? My syslog is attached. Thanks!!! syslog.txt

Ah cool that should hopefully do the trick thanks!

Yes there is but it just displays the users but no settings - just username and description

Hi - I'm running unRAID Server Pro version: 5.0-rc5, and i can't find where i change the security to user level - i've looked all over but just can't see it - must be blind lol Under Settings --> Identification i only see Server name and Comments Under Settings --> Share settings i see Enable User Shares, Included disk(s), Excluded disk(s) Nothing under SMB either Any guidance would be great! Cheers