insaneavi

Members
  • Posts

    30
  • Joined

  • Last visited

Converted

  • Gender
    Undisclosed

insaneavi's Achievements

Noob

Noob (1/14)

0

Reputation

  1. This is down again. - https://github.com/Squidly271/AppFeed shows a change was made around the same time this went down
  2. Hello Everyone, i finally gave my unraid server some much needed upgrades Mobo replaced, cpu replaced, ram and swapped out HSA card from a 8 to a 16 AMD Ryzen 5 3600X 6-Core @ 3800 MHz Micro-Star International Co., Ltd. PRO B550-VC (MS-7C56) , Version 3.0 LSI 9201-16i IT Mode HBA 8x PCIE 16 Lane SAS Card 6Gbps The system booted after i recreated the flash drive and added the old config, but when ran a parity to ensure everything is good (no data was added to the array) it was crawling and generating lots of errors, no hardware errors on the drives though. Can anyone shed some light on this? I thought it was the onboard Raid on the motherboard, but i am using the m.2 slot yet. Last check incomplete on Tue 24 Jan 2023 11:43:12 AM EST (today) Error code: aborted Finding 166511 errors topsite-diagnostics-20230124-1145.zip
  3. Below is the smart data, it is saying 00% remaining but i hope i am reading it wrong. smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.19.17-Unraid] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Crucial/Micron Client SSDs Device Model: Crucial_CT1050MX300SSD1 Serial Number: 164914EE2475 LU WWN Device Id: 5 00a075 114ee2475 Firmware Version: M0CR031 User Capacity: 1,050,214,588,416 bytes [1.05 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5417 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jan 10 14:47:34 2023 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x04) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1947) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocate_NAND_Blk_Cnt -O--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 45421 12 Power_Cycle_Count -O--CK 100 100 000 - 88 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Ave_Block-Erase_Count -O--CK 087 087 000 - 200 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 30 183 SATA_Interfac_Downshift -O--CK 100 100 000 - 0 184 Error_Correction_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 068 047 000 - 32 (Min/Max 14/53) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_ECC_Cnt -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 202 Percent_Lifetime_Remain ----CK 087 087 001 - 13 206 Write_Error_Rate -OSR-- 100 100 000 - 0 246 Total_LBAs_Written -O--CK 100 100 000 - 204639999184 247 Host_Program_Page_Count -O--CK 100 100 000 - 6394999975 248 FTL_Program_Page_Count -O--CK 100 100 000 - 3110043281 180 Unused_Reserve_NAND_Blk PO--CK 000 000 000 - 4434 210 Success_RAIN_Recov_Cnt -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 16383 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x24 GPL R/O 8000 Current Device Internal Status Data log 0x25 GPL R/O 8000 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL VS 35328 Device vendor specific log 0xa1 GPL,SL VS 3 Device vendor specific log 0xa2 GPL,SL VS 1 Device vendor specific log 0xa3 GPL VS 13824 Device vendor specific log 0xa4 GPL VS 354 Device vendor specific log 0xa4 SL VS 98 Device vendor specific log 0xa5 GPL VS 8000 Device vendor specific log 0xa5 SL VS 64 Device vendor specific log 0xa6 GPL VS 8000 Device vendor specific log 0xa6 SL VS 64 Device vendor specific log 0xa7-0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (16383 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 45419 - # 2 Vendor (0xff) Completed without error 00% 45321 - # 3 Vendor (0xff) Completed without error 00% 44821 - # 4 Vendor (0xff) Completed without error 00% 44514 - # 5 Vendor (0xff) Completed without error 00% 43743 - # 6 Vendor (0xff) Completed without error 00% 43023 - # 7 Vendor (0xff) Completed without error 00% 42739 - # 8 Vendor (0xff) Completed without error 00% 41960 - # 9 Vendor (0xff) Completed without error 00% 41150 - #10 Vendor (0xff) Completed without error 00% 40362 - #11 Vendor (0xff) Completed without error 00% 40251 - #12 Vendor (0xff) Completed without error 00% 40162 - #13 Vendor (0xff) Completed without error 00% 39395 - #14 Vendor (0xff) Completed without error 00% 38618 - #15 Vendor (0xff) Completed without error 00% 37790 - #16 Vendor (0xff) Completed without error 00% 37015 - #17 Vendor (0xff) Completed without error 00% 36190 - #18 Vendor (0xff) Completed without error 00% 35378 - #19 Vendor (0xff) Completed without error 00% 34598 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 20/41 Celsius Lifetime Min/Max Temperature: 14/53 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: -5/75 Celsius Temperature History Size (Index): 478 (14) Index Estimated Time Temperature Celsius 15 2023-01-10 06:50 27 ******** ... ..( 6 skipped). .. ******** 22 2023-01-10 06:57 27 ******** 23 2023-01-10 06:58 28 ********* 24 2023-01-10 06:59 28 ********* 25 2023-01-10 07:00 27 ******** 26 2023-01-10 07:01 27 ******** 27 2023-01-10 07:02 28 ********* ... ..( 40 skipped). .. ********* 68 2023-01-10 07:43 28 ********* 69 2023-01-10 07:44 27 ******** 70 2023-01-10 07:45 28 ********* 71 2023-01-10 07:46 28 ********* 72 2023-01-10 07:47 27 ******** 73 2023-01-10 07:48 28 ********* 74 2023-01-10 07:49 27 ******** ... ..( 3 skipped). .. ******** 78 2023-01-10 07:53 27 ******** 79 2023-01-10 07:54 28 ********* 80 2023-01-10 07:55 28 ********* 81 2023-01-10 07:56 28 ********* 82 2023-01-10 07:57 27 ******** 83 2023-01-10 07:58 28 ********* ... ..( 39 skipped). .. ********* 123 2023-01-10 08:38 28 ********* 124 2023-01-10 08:39 27 ******** 125 2023-01-10 08:40 28 ********* 126 2023-01-10 08:41 27 ******** ... ..( 6 skipped). .. ******** 133 2023-01-10 08:48 27 ******** 134 2023-01-10 08:49 28 ********* ... ..( 27 skipped). .. ********* 162 2023-01-10 09:17 28 ********* 163 2023-01-10 09:18 27 ******** 164 2023-01-10 09:19 27 ******** 165 2023-01-10 09:20 27 ******** 166 2023-01-10 09:21 28 ********* 167 2023-01-10 09:22 27 ******** ... ..( 6 skipped). .. ******** 174 2023-01-10 09:29 27 ******** 175 2023-01-10 09:30 28 ********* 176 2023-01-10 09:31 27 ******** 177 2023-01-10 09:32 28 ********* ... ..( 32 skipped). .. ********* 210 2023-01-10 10:05 28 ********* 211 2023-01-10 10:06 27 ******** 212 2023-01-10 10:07 27 ******** 213 2023-01-10 10:08 28 ********* 214 2023-01-10 10:09 27 ******** 215 2023-01-10 10:10 27 ******** 216 2023-01-10 10:11 28 ********* 217 2023-01-10 10:12 28 ********* 218 2023-01-10 10:13 27 ******** ... ..( 2 skipped). .. ******** 221 2023-01-10 10:16 27 ******** 222 2023-01-10 10:17 28 ********* 223 2023-01-10 10:18 28 ********* 224 2023-01-10 10:19 28 ********* 225 2023-01-10 10:20 27 ******** 226 2023-01-10 10:21 27 ******** 227 2023-01-10 10:22 28 ********* ... ..( 25 skipped). .. ********* 253 2023-01-10 10:48 28 ********* 254 2023-01-10 10:49 27 ******** ... ..( 32 skipped). .. ******** 287 2023-01-10 11:22 27 ******** 288 2023-01-10 11:23 28 ********* 289 2023-01-10 11:24 27 ******** 290 2023-01-10 11:25 27 ******** 291 2023-01-10 11:26 28 ********* 292 2023-01-10 11:27 28 ********* 293 2023-01-10 11:28 27 ******** ... ..( 10 skipped). .. ******** 304 2023-01-10 11:39 27 ******** 305 2023-01-10 11:40 ? - 306 2023-01-10 11:41 ? - 307 2023-01-10 11:42 21 ** 308 2023-01-10 11:43 21 ** 309 2023-01-10 11:44 21 ** 310 2023-01-10 11:45 22 *** 311 2023-01-10 11:46 23 **** 312 2023-01-10 11:47 22 *** ... ..( 3 skipped). .. *** 316 2023-01-10 11:51 22 *** 317 2023-01-10 11:52 23 **** ... ..( 8 skipped). .. **** 326 2023-01-10 12:01 23 **** 327 2023-01-10 12:02 24 ***** ... ..( 8 skipped). .. ***** 336 2023-01-10 12:11 24 ***** 337 2023-01-10 12:12 25 ****** ... ..( 19 skipped). .. ****** 357 2023-01-10 12:32 25 ****** 358 2023-01-10 12:33 26 ******* 359 2023-01-10 12:34 25 ****** 360 2023-01-10 12:35 26 ******* ... ..(114 skipped). .. ******* 475 2023-01-10 14:30 26 ******* 476 2023-01-10 14:31 30 *********** 477 2023-01-10 14:32 32 ************* 0 2023-01-10 14:33 28 ********* ... ..( 9 skipped). .. ********* 10 2023-01-10 14:43 28 ********* 11 2023-01-10 14:44 27 ******** ... ..( 2 skipped). .. ******** 14 2023-01-10 14:47 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 88 --- Lifetime Power-On Resets 0x01 0x010 4 45421 --- Power-on Hours 0x01 0x018 6 204639999184 --- Logical Sectors Written 0x01 0x020 6 327334226 --- Number of Write Commands 0x01 0x028 6 468898091376 --- Logical Sectors Read 0x01 0x030 6 575999860 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 252 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 - --- Average Long Term Temperature 0x05 0x020 1 53 --- Highest Temperature 0x05 0x028 1 14 --- Lowest Temperature 0x05 0x030 1 39 --- Highest Average Short Term Temperature 0x05 0x038 1 19 --- Lowest Average Short Term Temperature 0x05 0x040 1 - --- Highest Average Long Term Temperature 0x05 0x048 1 - --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 291 --- Number of Hardware Resets 0x06 0x010 4 112 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 13 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
  4. Is there a docker to plugin that can access to the array that can give me the estimated remaining life percentage of my SSD which is being used a cache drive?
  5. Thanks, I tried the USB and it wouldn't even detect them. I decided remove my hot spare and my cache drive, and then the preclrear on the 10tb's, in about 42 hours hopefully they will be good.
  6. Hello all, I have a quick question. I just got 4 10TB best buy easy store drives (on sale for 180 each BTW https://www.bestbuy.com/site/wd-easystore-10tb-external-usb-3-0-hard-drive-with-32gb-easystore-usb-flash-drive-black/6290669.p?skuId=6290669) Currently i have Norco 20 bay, which is maxed out, I wanted to know if i could connect 1-2 via USB and preclear them, this way i can save time on adding them to the array after shucking them. Also any thoughts on if prelcear via USB or using internal slot is any different (my thought is no as the same secotrs get read, then written and then read again regardless of the interface?)
  7. I have yet to get the drives in, but that is the plan (to preclear them before using them), and thanks! i rather be safe and then sorry tho it might take a week to get the upgrade done lol
  8. Quick question, If I currently have dual 8tb parity drives, and i want to swap them with 2 x 10tb drives, what would be the best process? Do a full parity check, shut down, swap out 1 8tb with the 10tb, power on, let it rebuild the parity on the new drive then power down replace the 2nd disk and let it rebuild, and then do a full parity check before changing any data?.
  9. Question, I have noticed that all of my Shares are set to: Minimum free space: 400GB, and my cache disk is a 300GB raptor drive. Could it be that unraid is now seeing that the disk of the cache disk is under 400gb that it skips it? yup i repalced my cache with a spare drive and that was the issue. closing thread
  10. attached. unraid-diagnostics-20170712-2026.zip
  11. hello All, I am currently using unraid 6.3.5 with 14 Disks, 2 Partiy Disks, 1 Cache Drive and 1 Hot spare. After moving data around to slowly format all my drives to XFS using manual methods and Unbalance (7 drives still to go ), All new data being added to the shares are doing straight to the Data drives. I have checked that settings on the shares via the Global Share settings, and use cache disk is turned on using Min Free Space:2000000. All the shares are set to use the cache disk. If i go directly to \\UNRAID\Cache\Share1 and copy the data there it will allow me and the mover will run overnight to move to the correct locations. Im not sure where to start troubleshooting this issue or what logs or screenshots to share with the user community. Thank you for any help
  12. Thank you!, it now runs properly, I was also able to stop the service, then turn it back on via the web interface!
  13. root@TOPSITE:~# cd /usr/local/emhttp/plugins/unbalance root@TOPSITE:/usr/local/emhttp/plugins/unbalance# ./unbalance configuration variable provided but not defined: SERVICE Usage of ./unbalance: -apiFolders string folders to look for api endpoints (default "/var/local/emhttp") -config string config location (default "/boot/config/plugins/unbalance/unbalance.conf") -dryRun perform a dry-run rather than actual work (default true) -folders string deprecated - do not use -log string pathname where log file will be written to (default "/boot/logs/unbalance.log") -notifyCalc int notify via email after calculation operation has completed (unraid notifications must be set up first): 0 - No notifications; 1 - Simple notifications; 2 - Detailed notifications -notifyMove int notify via email after move operation has completed (unraid notifications must be set up first): 0 - No notifications; 1 - Simple notifications; 2 - Detailed notifications -port string port to run the server (default "6237") -rsyncFlags string custom rsync flags root@TOPSITE:/usr/local/emhttp/plugins/unbalance# it now gives me the above results log entry when trying to enable: Jun 28 20:15:41 TOPSITE php: /usr/local/emhttp/plugins/unbalance/scripts/start Jun 28 20:15:41 TOPSITE sudo: root : TTY=unknown ; PWD=/usr/local/emhttp ; USER=nobody ; COMMAND=/bin/bash -c /usr/local/emhttp/plugins/unbalance/unbalance -port 6237