desertfox_0815

Thanks Jorge for checking it. Currently im running a extended smart check. looks like all data is fine.

Fix Common Problems just noticed that disc3 has errors but says: "If the disk has not been disabled, then Unraid has successfully rewritten the contents of the offending sectors back to the hard drive." So i guess data should be valid?

Hello, over last night i've got a disc with 32 errors on it. smart short test returned no errors. disc is still healthy diags are attached. These are the errors found in disc log its a toshiba n300 8tb disc running on a lsi 9205-8i hba on a sas-to-sata breakout cable. disc is still running fine. i've entered maintenance mode and did a filesystem check with -n and without option. no errors found and no errors corrected. what should i do? is it safe to simply run the array? should i format the disc and rebuild it? thanks alot tower-diagnostics-20230511-0651.zip

push

Anybody?

Hey is there anybody out there willing to help? Since switching back to ipvlan unraid is working fine.

Ok after further investigation "docker service" is the problem. After disabling the ping reaches 8.8.8.8 i've switched back to "macvlan" for testing. ipvlan was recommended after a problem i've posted here. it would be nice if someone could analyze my diag files if there is any problem we could fix

ping to 8.8.8.8 or 1.1.1.1 was already stuck again. i've stopped VM- and docker-Services via settings. Ping startet to reach its destination. After enabling docker and vm services it startet reaching 8.8.8.8 for approx. 2 min now it stopped reaching 8.8.8.8 again.

hello @all i've stumbled over a strange problem. my unraid server is hosting a couple of docker containers and 1 linux vm which hosts my pihole. i was able to access the unraid server normally via network. but pinging to 1.1.1.1 or google.de via console was not possible. unraid also wasnt able to get docker or plugin updates. after stopping the VM-service it wasnt able to restart it with the following error: after rebooting unraid its working like a charme. diag is attached as well. maybe there is someone who can tell me what the problem is and how to solve it. thanks alot florian tower-diagnostics-20230406-0740.zip

Perfect, i will do so if... thannks again for your always perfect help jorge

So, switched to ipvlan and rebooted the server cleanly. here is the new diag file tower-diagnostics-20221012-1355.zip

I will do so asap. Will report, thanks

Hey @all my unraid server just completly filled my log device. i was able to save a diagnostigs file. could someone tell me what was happening here? i've resized the logdev to 4096M but is was filling up again. reboot was only possible with a hard reboot from cli, rebooting in gui did not work. Also stopping the array and unmounting usershares did not respond. thanks alot, i'm kinda worried. tower-diagnostics-20221012-0902.zip

thanks alot Jorge for your time. system is currently running like it should

hello, i've changed the sas-sata cables and the sata power cables. here is a new diagnostics file. could you verify that everything is fine? tower-diagnostics-20220926-1111.zip

thanks for the fast reply. ok i will change the power connection here. currently everything rebuilds fine. waiting for first disk to be done and start second rebuild. anything else i should check? i will also change the sas->sata cables.

Hello, my unraid server was performing a parity sync/rebuild (switch from single to dual parity) and finished at 4:24 this morning. Shortly after 1 disc (disc4) was disabled within unraid. After discovering this error i've checked everything and stopped the array, removed the disc, started array, stopped array, reassigned the disc and started the array with rebuild. shortly after disc2 was disabled too. currently rebuild of disc4 is still running and disc2 is still disabled(will be rebuild after disc4 returns normal operation). Can someone tell me what happened here? Currently i'm hoping the rebuild will finish without error and i wont lose any data. Diags attached! My server is a Ryzen 5600G based system, Asus b450 gaming-f motherboard, LSI SAS2308 IT-Mode, 6x Toshiba N300 8TB HDD, 4 ssds for 2 cache pools. Thanks alot. tower-diagnostics-20220923-0638.zip

Changed to a 1Gbit dual-port Intel server nic. was running perfect with full speed. i've filed a warranty claim with the mainboard seller. Board will be exchanged. Thanks alot

Any idea how to find the problematic part? Rebooted Unraid, Switch and Client. changed Switchports and cables.

also changed cat7 cable and switchport. did not solve problem. server has been rebooted also. my client is able to get full gigabit speed with speedtests over WAN and downloading stuff from WAN

Thanks just installed and tested. iperf3 shows the same problem. Sending to unraid is fast, receiving from unraid is only 0.7x speed 192.168.178.9 is my unraid and .10 my client. root@Tower:~# iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 192.168.178.10, port 58013 [ 5] local 192.168.178.9 port 5201 connected to 192.168.178.10 port 58014 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 108 MBytes 908 Mbits/sec [ 5] 1.00-2.00 sec 113 MBytes 947 Mbits/sec [ 5] 2.00-3.00 sec 113 MBytes 948 Mbits/sec [ 5] 3.00-4.00 sec 113 MBytes 948 Mbits/sec [ 5] 4.00-5.00 sec 112 MBytes 936 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 930 Mbits/sec [ 5] 6.00-7.00 sec 113 MBytes 947 Mbits/sec [ 5] 7.00-8.00 sec 113 MBytes 949 Mbits/sec [ 5] 8.00-9.00 sec 112 MBytes 936 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 932 Mbits/sec [ 5] 10.00-10.05 sec 5.51 MBytes 945 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.05 sec 1.10 GBytes 938 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- ^Ciperf3: interrupt - the server has terminated root@Tower:~# iperf3 -c 192.168.178.10 Connecting to host 192.168.178.10, port 5201 [ 5] local 192.168.178.9 port 50918 connected to 192.168.178.10 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 82.0 MBytes 688 Mbits/sec 26 238 KBytes [ 5] 1.00-2.00 sec 80.6 MBytes 676 Mbits/sec 0 240 KBytes [ 5] 2.00-3.00 sec 79.8 MBytes 669 Mbits/sec 0 240 KBytes [ 5] 3.00-4.00 sec 79.8 MBytes 669 Mbits/sec 0 240 KBytes [ 5] 4.00-5.00 sec 81.1 MBytes 680 Mbits/sec 0 339 KBytes [ 5] 5.00-6.00 sec 80.0 MBytes 671 Mbits/sec 0 376 KBytes [ 5] 6.00-7.00 sec 80.0 MBytes 671 Mbits/sec 0 240 KBytes [ 5] 7.00-8.00 sec 78.8 MBytes 661 Mbits/sec 0 240 KBytes [ 5] 8.00-9.00 sec 80.0 MBytes 671 Mbits/sec 0 240 KBytes [ 5] 9.00-10.00 sec 80.0 MBytes 671 Mbits/sec 0 240 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 802 MBytes 673 Mbits/sec 26 sender [ 5] 0.00-10.00 sec 799 MBytes 670 Mbits/sec receiver iperf Done.

is there a iperf version for unraid?

Hey @ all. lately i've noticed that my read speeds are around 78,5mb/s and very constant. writing still runs arround 110-113mb/s no matter if i write to cache pool (2x 1Tb ssd) or directly into the array. parity checks are running extremly fast so no read problem with the discs or adapter itself i guess.. nothing changed besides newest stable build of Unraid 6.10.3 i've attached my diagnostics and hope someone is able to help me. thanks alot tower-diagnostics-20220701-0705.zip

Changed Powercables...Problem is gone. I was able to rebuild parity without errors. the "safety" parity check was also clean. Thanks alot

Ok thanks, cables are already ordered. Will arrive monday. could you tell me where you found these errors?