[[6.9] After moving to 6.9 local GUI mode not working]

1 minute ago, ich777 said:

Do you need the Nvidia Driver?

I have no machine where I can test both the Nvidia Driver and the Intel-GPU-TOP Plugin but I think you should be also able to install both and the output should happen on the Nvidia card.

Since you tell me the iGPU can transcode, Nvidia driver is has no utility.

My graphic card is recognized by Unraid (device) si I will create my VM without nvidia drivers. It should work!

🙂

 

[[6.9] After moving to 6.9 local GUI mode not working]

14 hours ago, NLS said:

@ich777 yeap, you fixed it - plugin fixes the issue

thanks!

 

@ich777 I confirm, with gpu intel top plugin, issue fixed (nvidia driver uninstalled).

Thanks you're a genius.

[[6.9] After moving to 6.9 local GUI mode not working]

7 hours ago, ich777 said:

Bind the GT730 that is for the VM to VFIO (Tools -> System Devices -> Select everything that is related to the card and press Apply), so Unraid can't use the card for video output.

 

Also why are you using the P2000 for transcoding?

 

The i3-8100 has about the same transcoding perfomance as the P2000 and is more efficient than the P2000 and also has no limits in simultaneous transcodes.

It works! Thanks a lot @ich777

I'll wait patch/OSupdate for the localGUI issue.

You're very helpfull

[[6.9] After moving to 6.9 local GUI mode not working]

3 minutes ago, ich777 said:

Bind the GT730 that is for the VM to VFIO (Tools -> System Devices -> Select everything that is related to the card and press Apply), so Unraid can't use the card for video output.

 

Also why are you using the P2000 for transcoding?

 

The i3-8100 has about the same transcoding perfomance as the P2000 and is more efficient than the P2000 and also has no limits in simultaneous transcodes.

I did it (bind the GPU) but i lose localGUI again. Should I retry the command line?

 

I choose to add a dedicated P2200 because of the intense CPU load during in transcode task.

Plex could have 8 users at the same time.

Maybe I'm wrong.  🙂

[[6.9] After moving to 6.9 local GUI mode not working]

@ich777

You're right

in bios main output is igfx.

Bios launch, OS Key boot are on Igfx output until blank screen

local Gui is on nvidia card (user + password and local interface)

 

Here is my hardware config (+msi GT730 graphic card)

 

[[6.9] After moving to 6.9 local GUI mode not working]

great thanks @ich777

i recover local GUI with command lines modprobe i915 and /etc/rc.d/rc.4

It works!! like other users,

 

But now, local GUI display is on my nvidia card (curiously).

I didn't think to uninstall nvidia driver plugin...

Is there a trick to move the local gui to the igfx ?

 

Thanks for the progress

 

[[6.9] After moving to 6.9 local GUI mode not working]

12 hours ago, ich777 said:

What device is choosen in the BIOS as the first graphics device?

Where is your Display connected to the Nvidia card or to the iGPU?

 

Have you also rebooted?

 

Is this all really needed in your syslinux.cfg:

BOOT_IMAGE=/bzimage pcie_acs_override=downstream,multifunction vfio_iommu_type1.allow_unsafe_interrupts=1 initrd=/bzroot,/bzroot-gui

 

Do you boot with Legacy or UEFI?

 

May I ask why do you installed the Nvidia-Driver if you use it for a VM, also the GT730 is not really a transcoding beast if you use it for that.

Thanks ICH777

 

Here are my answers

Both displays (Nvidia card and iGPU) are connected.

First graphic device is IGFX

Yes I rebooted

How can I clean the syslinux.cfg?

I boot with UEFI

 

I install Nvidia drivers because I'll install soon a PNY Quadro P2200 for transcode

The GT730 is only used for the VM display.

 

Thanks ICH777

[[6.9] After moving to 6.9 local GUI mode not working]

2 hours ago, sterofuse said:

Nvidia 2021-03-10 Plugin Update and reboot fixed it for me, thank you!

unlucky, Not for me (6.9.1 updated - nvidia updated - nerd pack and many plugins uninstalled)

gpu gt730 (for vm which i uninstalled too) and i3-8100 CPU

diagnostics-20210310-1825.zip

[[6.9.X] Local GUI Mode does not work.]

Hello (french and newbie),

 

I've got the exactly same issue after intalling 6.9 version from 6.8.3. Everything worked fine in previous version.

 

How could someone help me? I post diagnostic and Update assistant report if that could help to recover le GUI Mode (webGUI mode works fine from a distant computer)

 

 

Here is the Update assistant report :

Current unRaid Version: 6.9.0 Upgrade unRaid Version: 6.9.0
NOTE: You are currently running the latest version of unRaid.
Checking for plugin updates / OK: All plugins up to date
Checking for plugin compatibility / OK: All plugins are compatible
Checking for extra parameters on emhttp / OK: emhttp command in /boot/config/go contains no extra parameters
Checking for disabled disks / OK: No disks are disabled
Checking installed RAM / OK: You have 4+ Gig of memory
Checking flash drive / OK: Flash drive is read/write
Checking for valid NETBIOS name / OK: NETBIOS server name is compliant.
Checking for ancient version of dynamix.plg / OK: Dynamix plugin not found
Checking for VM MediaDir / DomainDir set to be /mnt   / OK: VM domain directory and ISO directory not set to be /mnt
Checking for mover logging enabled / OK: Mover logging not enabled
OK: /boot/config/extra.cfg does not exist
No issues were found with your server that may hinder the OS upgrade. You should be good to go

diagnostics-20210308-1137.zip

[[6.9] After moving to 6.9 local GUI mode not working]

Hello,

 

Like Kaldek, I've got the exactly same issue after intalling 6.9 version from 6.8.3. Everything worked fine in previous version.

 

How could someone help me? I post diagnostic and Update assistant report if that could help to recover le GUI Mode (webGUI mode works fine from a distant computer)

 

 

Here is the Update assistant report :

Current unRaid Version: 6.9.0 Upgrade unRaid Version: 6.9.0
NOTE: You are currently running the latest version of unRaid.
Checking for plugin updates / OK: All plugins up to date
Checking for plugin compatibility / OK: All plugins are compatible
Checking for extra parameters on emhttp / OK: emhttp command in /boot/config/go contains no extra parameters
Checking for disabled disks / OK: No disks are disabled
Checking installed RAM / OK: You have 4+ Gig of memory
Checking flash drive / OK: Flash drive is read/write
Checking for valid NETBIOS name / OK: NETBIOS server name is compliant.
Checking for ancient version of dynamix.plg / OK: Dynamix plugin not found
Checking for VM MediaDir / DomainDir set to be /mnt   / OK: VM domain directory and ISO directory not set to be /mnt
Checking for mover logging enabled / OK: Mover logging not enabled
OK: /boot/config/extra.cfg does not exist
No issues were found with your server that may hinder the OS upgrade. You should be good to go

diagnostics-20210308-1137.zip

[[6.9.0] Won't boot after 6.8.3 to 6.9.0 update]

it seems that the unraid nvidia caused issue (source : os update assistant). after uninstall it, the update assistant conclude "No issues were found with your server that may hinder the OS upgrade. You should be good to go"

[[6.9.0] Won't boot after 6.8.3 to 6.9.0 update]

It works but I lose my SSD cache drive. It appears now in unassigned device. Maybe one of the bug origin. I will restore my cache drive and reboot 2 times to be sure the everything works again.

No OS update for me now!

Thanks a lot Jobine.

[[6.9.0] Won't boot after 6.8.3 to 6.9.0 update]

sorry it's the first time I have to do this. Where must I copy the "previous" files in the flash drive to recover the 6.8.3 system? Thanks Jobine

[[6.9.0] Won't boot after 6.8.3 to 6.9.0 update]

Did I lose all my datas ?

[[6.9.0] Won't boot after 6.8.3 to 6.9.0 update]

No boot for the 2nd reboot after update...

If return to 6.8.3 is not possible (no backup), is it possible to recover the system (pro version)?

Desperate user