YoloSwagLord

Hi thanks all this was the problem! I changed the power cables and the speeds are now as they should be, 200mb/s a second I want to thank @JorgeB and @itimpi for your help and patience with me. you guys are doing gods work!

Hi thanks for your reply, I changed the SATA cables to the ASM1166 ports on the controller, this seems to reduce the ATA errors to just 1 drive (ATA1) this is the emulated disk that im rebuilding. a example is shown below: for more detailed info I uploaded the diagnostics as well. is it a option to format the rebuilding (Disk 1) remove it from the array and rebuild it using the parity but then on a formatted disk? btw. Disk 1 (the one that is causing issues) doesn't use the raid-controller but is directly connected to the motherboard as shown on the screenshot below. projectplex-diagnostics-20231208-1323.zip

Hi I received my new controller (https://www.amazon.nl/dp/B08L7W8QFT?psc=1&smid=A21CTMDLFXECIV&ref_=chk_typ_imgToDp) installed it rebooted in to safe mode. started the array, started the sync and the speeds are still unbearable slow, like 150kb/s. I posted my diagnostics in the attachments. projectplex-diagnostics-20231207-2018.zip

Thanks for your reply, I chose to do the rebuild since the SATA is now connected to the motherboard instead of the controller. all the checks looks to be correct as in the attachments of previous reply's, but another issue occured. the speed of the data rebuild is very slow (500kb), with that speed its gonna take 200 days to complete the rebuild. I did the rebuild in maintenance mode and clicked the button sync as described in the topic.

is there a landingpage/tutorial on how to find the plugin that is causing issues? or a easy way to find out? I used the xfs_repair status: of the check file system tab. I posted the logg in the attachment. Is there a guide on how to rebuild the disk? filesys_check-v.txt

I just rebuild disk1 with the check file system with the arg -v. But the disk stays offline/disabled even when I stopped the array en started it again.

I just ordered this controller: https://www.amazon.nl/dp/B08L7W8QFT?psc=1&smid=A21CTMDLFXECIV&ref_=chk_typ_imgToDp and I put the SATA cable directly in to the motherboard for the rebuild. lets hope this will work.

Thanks for your reply, I rebooted in to "normal" mode and the issues as described in the topic still occur (GLIBC_2.34 not found & new password). when the disc is emulated this shouldn't be the case right? I should be able to boot in to "normal" unraid and my dockers should be running right? btw. im gonna order a new raid controller for sure, but need to be able to get the server back up online while the new controller is in transit.

Thanks for your quick reply, I will buy a new one for sure! and I uploaded the new diagnostics in the attachments. The disk still seems to be disabled when the array is started. projectplex-diagnostics-20231205-1212.zip

Oke it seems like it did correctly in the check filesystem. I added the 4 documents in the attachments: filesys_check-n.txt filesys_check.txt file sys_check-L.txt projectplex-diagnostics-20231205-1152 filesys_check-L.txt filesys_check.txt filesys_check-n.txt projectplex-diagnostics-20231205-1152.zip

I checked the cables, but now disk 1 shows up disabled, and I have no idea how to enable the drive.

my bad this in the attachments the diagnostics with the array started. projectplex-diagnostics-20231204-1659.zip

I added the new diagnostics to the attachments, thanks for your help! projectplex-diagnostics-20231204-1637.zip

Hi in safe mode I can boot and login, I cant seem to add shares. or start dockers. any suggestions how to move onward from here? ***EDIT*** if I boot back in to "normal" mode the same error occurs.

Dear community, all of a sudden some dockers on my unRaid wont start, I did some research and there was a error message saying that disk 1 was read only or full. So I checked and disk 1 still had some space on it. So I started googling and found this topic, suggesting that the share is broken. So I checked that and all my shares seem to be gone. I tried to add the shares but they didn't show up nor gave it an error message. So I thought it was a smart idea to update the OS, I did this using the tool tab in Unraid. after the update I rebooted it and got the screen below: I tried to make a password a few times but it just shows a blank page after I clicked set password. a simple refresh got me back to the page as shown in the screenshot above. I decided to hard reboot the system and watch the monitor hooked up to the unraid server. Then I got very very worried when I saw this screen: I added the last diagnostics file to the attachments. any help would be so helpful I have no idea how to solve this. projectplex-diagnostics-20231204-1146.zip