peter_sm

Hi, just finnished a pre clear of my new 1.5TB WD disk, is this disk OK? = unRAID server Pre-Clear disk /dev/sdd = cycle 1 of 1 = Disk Pre-Clear-Read completed DONE = Step 1 of 10 - Copying zeros to first 2048k bytes DONE = Step 2 of 10 - Copying zeros to remainder of disk to clear it DONE = Step 3 of 10 - Disk is now cleared from MBR onward. DONE = Step 4 of 10 - Clearing MBR bytes for partition 2,3 & 4 DONE = Step 5 of 10 - Clearing MBR code area DONE = Step 6 of 10 - Setting MBR signature bytes DONE = Step 7 of 10 - Setting partition 1 to precleared state DONE = Step 8 of 10 - Notifying kernel we changed the partitioning DONE = Step 9 of 10 - Creating the /dev/disk/by* entries DONE = Step 10 of 10 - Testing if the clear has been successful. DONE = Disk Post-Clear-Read completed DONE Disk Temperature: 24C, Elapsed Time: 24:58:49 ============================================================================ == == Disk /dev/sdd has been successfully precleared == ============================================================================ S.M.A.R.T. error count differences detected after pre-clear note, some 'raw' values may change, but not be an indication of a problem 19,20c19,20 < Offline data collection status: (0x80) Offline data collection activity < was never started. --- > Offline data collection status: (0x84) Offline data collection activity > was suspended by an interrupting command from host. 54c54 < 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 --- > 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 58c58 < 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 --- > 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 63c63 < 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 12 --- > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 14 ============================================================================ Smart results === START OF INFORMATION SECTION === Device Model: WDC WD15EARS-00Z5B1 Serial Number: WD-WMAVU2990125 Firmware Version: 80.00A80 User Capacity: 1,500,301,910,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Jul 27 13:12:02 2010 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (34800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 188 188 021 Pre-fail Always - 5558 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 24 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 29 194 Temperature_Celsius 0x0022 126 120 000 Old_age Always - 24 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Hi, I'm using ReneV:s script, this one have some xtra functions that the other don't have. I did have some problem in the past when I should wake may server, but after upgrading to 4.5.3 these issue are gone now :-) So Suspending my server works great now. //Peter

Replace echo 3 >/proc/acpi/sleep with this pm-suspend

If anyone are interested using pm-utils to suspend your server so here are is link to latest version -> ftp://distro.ibiblio.org/pub/linux/distributions/zenwalk/i486/snapshot/ap/pm-utils-1.2.6.1-i486-1.txz //Peter

Remove echo and remove " around the script name

After googling I see there could be some issue with this driver r8169 http://www.google.se/search?q=pm-suspend+%2Br8169&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:sv-SE:official&client=firefox-a This is what I have. NIC driver info (from ethtool -i) driver: r8169 version: 2.3LK-NAPI firmware-version: bus-info: 0000:03:00.0 But I have run very many suspend & WOL and so far it's looks good, right now I using Pm-utils to suspend my server :-) so far so good....

Hi I have this PSU: Corsair CMPSU-650TX 650W, I also have the latest bios. Then I have a 9 disk and a adaptec 1430SA card So it would be interesting if it's possible to get a updated version 4.5 with the latest kernel What did you change regarding "overvolting" ? When I upgraded the bios I did a "load optimized settings"

My suspend works great, also the WOL, but sometimes when waking the server the unRAID server starts up the fan are running but that's it, the server are not online. so the only thing is to powerdown, when starting up it do a parity check. Have someone else this issue ? I have edit my syslinux.cfg and add this : append initrd=bzroot acpi_sleep=s3_bios I'm looking to see if this could be a solution -> http://wiki.archlinux.org/index.php/Pm-utils Here is the packages -> http://ftp.riken.go.jp/pub/pub/Linux/slackware/slackware-13.0/slackware/ap/pm-utils-1.2.5-i486-1.txz Have someone else using this

Hi. great script, did this also spinn upp drives when I starting my media player ? as the "spinn_drives" script ?

Just a stupid question .. I have search, but how do you start this script? from the GO file? for this script needs to be running all the time and check if the drives are spunn down ? Please.... Tahnks Peter