joe90

ok great - thanks for the help! back online with all my data...

yes the old disk as stated above is : the 6tb is now seen in unassigned device as dev1 and was previously formatted with xfs and usage was about 90%

I installed the disk14 18 tb has a replacement for the 6tb that was saying it was defective - then let it recover the 6tb is now seen in unassigned device as dev1 and was previously formatted with xfs and usage was about 90%

here's the latest diag in maintenance mode sixertower-diagnostics-20220713-1950.zip

Phase 1 - find and verify superblock... bad primary superblock - bad magic number !!! attempting to find secondary superblock... attempting to find secondary superblock... unable to verify superblock, continuing... Exiting now....

after letting the 18tb drive rebuild it still shows as unmountable :wrong or no filesystem but the status of the drive is back to green and shows unmountable disk present disk 14 : ST180000(sde)

ok thanks for the help - I removed the 6tb drive and replaced the drive with another 18TB and started reconsctruction - this will run for another 5-10 hours I've removed the 6 TB from the arrays and started data-rebuild, the drive shows as DEV 1 here's the started diagnostics sixertower-diagnostics-20220703-1414.zip

So I was on vacation and when i came back my server was showing errors on 1 drive and unmountable on another - I restarted and the errors on the other drives disappeared but disk 14 has an error unmontable wrong or no file system but when i put the server online the disk still showed up as an available - not as an emulated disk sixertower-diagnostics-20220702-1641.zip

ok so what is the process for the installation? I'll try it on one of my server on 5.0 rc16c

filled the survey...your project looks interesting...

are we there yet...it's technically tomorrow

I do that with a friend via crashplan

My OPENELEC server uses both servers as a source for TV shows (TVTOWER) and Movies (MOVIETOWER) from DVD rips to blu ray - all I can say so far is that it keeps the drives cool at all times and they look very good sitting next to each other. I will probably built an army of them as I fill them up and reclassify my data to fit in 1 box with capacity between 10Gb and 20Gb depending on the budget and the price of hard drives

Current setup #1 Case: Fractal Design node 304 Motherboard: Asus C60M1-I RAM: Ripjaw 4Gb Drive : 5 Western Digital Red WDC_WD30EFRX 3Tb, 1 Western Digital Green WDC_WD20EARX 2Tb power supply : Corsair TX 550M Current Setup #2 Case: Fractal Design node 304 Motherboard: Asus E35M1-I RAM : Ripjaw 4Gb Drives : 4 Hitachi Hitachi_HDS5C3030ALA630, 3Tb 1 Western Digital Green WDC_WD20EURS, 2Tb 1 Western Digital Green WDC_WD20EARS, 2Tb power supply : Antec True Power 500 pictures will be added later - trying to figure out how...

I'm using no-ip.com from my router (pfsense) to locate my server and point ports to unraid for crashplan and torrent server

squeezebox classic and softsqueeze

I'm using Crashplan server and hamachi so users can do backup safely and copy files to their shares

seems that a new version is out for linux....

Simply tried a different brand of usb key some are simply not detected on boot or in BIOS Sent from my Nexus S using Tapatalk

Yes that's the main reason to go with Unraid!

there's one on eBay http://www.ebay.ca/itm/WESTERN-DIGITAL-WD1600-WD1600JD-22HBC0-160gb-SATA-HDD-/350267650789?pt=LH_DefaultDomain_0&hash=item518d9432e5#ht_500wt_969 look also for the DCM number to match

this drive won't work for sure you have a seagate and the OP has a WD I had success a few times with board replacement but you really have to make sure you have the same board revision the last part WD1600JD-22HBC0 is crucial

got an error today when I started a parity check 1- size of arrays is not showing properly 2 - error at end of page

yes I suspect the router is slowing down your access...

Check your cables is everything Plugged in the switch? Sent from my Nexus S using Tapatalk