Jump to content

tola5

Members
 View Profile  See their activity

  • Posts

    191

  • Joined

  • Last visited

 Content Type 

Posts posted by tola5

    LSI 9201-16e unraid can see the card but no HDD

    in General Support

    Posted

    Hi after changing a cable  so I could  use all my slut in LSI 9201-16e
    Will my unraid  not see any HDD .
    No matter  the cable and what off the sas plate I connected  it too .
    Also the sas plate work out any problem  in a other  controller. 
    So fell I have  try what  I can  think off .. can see in syslog it give a error 
    But not sure what  it mean  
    Try too add the part
    Sorry it look wird hope the syslog help more but it spicel the
    mpt2sas thing I was wondering what will say it the driver as I understand ?

    Edit the time code on the syslog and the post info is different update the post today 


    Tower kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Aug 4 23:03:53 Tower kernel: sdc: sdc1 Aug 4 23:03:53 Tower kernel: sd 4:0:0:0: [sdc] Attached SCSI disk Aug 4 23:03:53 Tower kernel: ata5: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata6: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata7: SATA link down (SStatus 0 SControl 330) Aug 4 23:03:53 Tower kernel: ata8: failed to resume link (SControl 0) Aug 4 23:03:53 Tower kernel: ata8: SATA link down (SStatus 0 SControl 0) Aug 4 23:03:53 Tower kernel: BTRFS: device fsid 3a0fe81f-ee26-4611-91b0-f8133532d249 devid 1 transid 152680 /dev/sdb1 scanned by udevd (1756) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: sending diag reset !! Aug 4 23:03:53 Tower kernel: random: crng init done Aug 4 23:03:53 Tower kernel: random: 7 urandom warning(s) missed due to ratelimiting Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: diag reset: SUCCESS Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: _base_spin_on_doorbell_int: failed due to timeout count(10000), int_status(c0000000)! Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: doorbell handshake int failed (line=5934) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: _base_get_ioc_facts: handshake failed (r=-14) Aug 4 23:03:53 Tower kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:11045/_scsih_probe()! Aug 4 23:03:54 Tower kernel: EDAC amd64: F17h detected (node 0). Aug 4 23:03:54 Tower kernel: EDAC amd64: Node 0: DRAM ECC disabled. Aug 4 23:03:54 Tower kernel: EDAC amd64:


    tower-syslog-20210804-2300.zip





    6.9 pool questions

    in General Support

    Posted

    19 minutes ago, UtahDeLorean said:

    So I pulled the trigger and moved to 6.9. I put almost all of the drives into the main array. I however have 6 drives that I put into its own pool... It's only giving me 3Tb (it's Six 1Tb drives) and it's not indicating any parity. So did I do something wrong? Also how should it show up on the network?

    Will think  it for  you  chose  raid1  when you  make it ? And for  the network  par I like  too know  myself  should  just too make a question  myself  after use 2 X 4TB so that we  

    can both need help too . My are also just setting  there 

    Windows 10 VM Input Lag

    in VM Engine (KVM)

    Posted · Edited by tola5

    Ok some update even it not too much help.
    my os are Unraid OS version 6.9.0-rc2
    it work perfect before and then after a night sleep it happen .

    have try running on a Ubuntu that I red other have the same problem and it was only a windows problem but  I fell it better but still  there video playing audio stop some time .
    Now I have try too ruining windows 10  just clean on my hardware work fine will try boot the nvme up and use it as vm later  and give a update

    the whole are pretty weird

    Ok a update it the same when it run as a vm , I have not expected different but just too try rule it out .
    also try  deleted my original livbirt image and created a new one that one say it have help him ..
    But as I wrote not like I change something it work one day then power off go to bed  and next day 

    anyone have some crazy guess hope it ok I also post here think it better when it sound like we have the same problem too keep it one place  and help is other  but of cores if people think it better too keep it in multi post I will do that

    Tower_UpdateVM.png

    tower-diagnostics-20210104-1028.zip

    Windows 10 VM Input Lag

    in VM Engine (KVM)

    Posted

    3 hours ago, Noslen said:

    For me is the same, here. Have you found a solution

    have it just happen for you today ? just got the problem today no problem yesterday  nothing change but power my server off go to bed and now it happen ?  can it be a windows update or something ?

    [DEPRECATED] dyonr - qbittorrentvpn

    in Docker Containers

    Posted

    23 hours ago, rukiftw said:

     

    please note that in order for uploading to work:

    1. you have to have port forwarding through your vpn provider and setup the client to use those ports 
    2. upload speed will be based on your vpn's location and your speed to it.

     

    yea test speed and it shold be ok it work now some time but fell more bad TorGuard vs PIA as I use before sadly there some problem with it at the moment. any way thx

    [DEPRECATED] dyonr - qbittorrentvpn

    in Docker Containers

    Posted

    49 minutes ago, Dyon said:

    I haven't changed any settings myself, except disabling the temp-storage.  

    Connection: TCP/µTP

    Port 8999, use UPnP/NAT-PMP

    Connection limits: 50/10/20/4

    Bittorrent: DHT/PeX/Local Discovery

     

    With how many DHT Nodes are you connected, shown at the bottom of the page.

    Also; If you click on a torrent and go to the Peers section, do you see others?

    And, what is the status of the trackers? Do they show as Working, Updating or Not working?

    368  DHT notes 

    And for peers no on the list it show 0 (number) 

    And tracker some work other don't.

    It start too upload now but really bad only like 150kb can be unlucky but nomaly it a few MB sek

    network speed low one way

    in General Support

    Posted

    6 hours ago, Frank1940 said:

    I am also lost.  I am assuming that English is not your native language.

     

    Please write out your problem in your native language.  At that point, you should use the Google Translator program to translate your text into English.  (Google Translate supports over 100 languages.)

     

    When you are writing, you should use short concise sentences. They translate better.   Be sure that your problem is clearly defined in your native language.  Check the text carefully for any grammatical and spelling mistakes.  (Translation of mistakes in the original text will cause confusion!)

     

    Be sure that you describe how you are transferring the files between your two servers.

    hope it help . But good news it work now but don't ask me why so weird

    network speed low one way

    in General Support

    Posted · Edited by tola5

    has 2 unraid server
    Tower Version: 6.9.0-beta25
    and  Plex Version: 6.8.3
    if I send files from Tower to Plex it is at max speed  same with Plex server ,  to a Unassigned Devices drive . but if I send from plex to tower it max out at 10 MB has got new cables. but should not be that.  when it works the other way which is totally weird. 
    the speed is the same  to a M2  where windows 10 is installed  same if it is to the Array  with catch use or not

    just give the best though  all welcome im lost

    tower-diagnostics-20200813-1255.zip plex-server-diagnostics-20200813-1304.zip

    Get message when disk have run X time

    in General Support

    Posted

    Hi first sorry if it not the right place not sure what forum it was best for .

    Have ask on unraid reddit but look like no one knows but look like im not the only one there will find it useful if it possible , with a plugin or something ?

    Too get a message when you HDD have run X year I know you can just wate too it brake total or look at smart manuel but just find it a nice thing if it was possible

    Problem after created new Win 10 VM

    in VM Engine (KVM)

    Posted

    Ok now it "boot " just with that but just give black screen. Have try go back too 6.8.0 try q35 from 3.0 and up out it help no one there have any ide ? 

    ErrorWarningSystemArrayLogin-nodefaults \-chardev socket,id=charmonitor,fd=33,server,nowait \-mon chardev=charmonitor,id=monitor,mode=control \-rtc base=localtime \-no-hpet \-no-shutdown \-boot strict=on \-device pcie-root-port,port=0x13,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x3 \-device pcie-root-port,port=0x14,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x4 \-device pcie-root-port,port=0x8,chassis=6,id=pci.6,bus=pcie.0,multifunction=on,addr=0x1 \-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x1.0x1 \-device pcie-root-port,port=0xa,chassis=2,id=pci.2,bus=pcie.0,addr=0x1.0x2 \-device pcie-root-port,port=0xb,chassis=3,id=pci.3,bus=pcie.0,addr=0x1.0x3 \-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x7.0x7 \-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,addr=0x7 \-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x7.0x1 \-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x7.0x2 \-device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x0 \-drive 'file=/mnt/disks/KINGSTON_SNVP325S2128GB_10OS10HFT73Z/Windows 10/vdisk1.img,format=raw,if=none,id=drive-virtio-disk2,cache=writeback' \-device virtio-blk-pci,scsi=off,bus=pci.3,addr=0x0,drive=drive-virtio-disk2,id=virtio-disk2,bootindex=1,write-cache=on \-drive 'file=/mnt/user/isos/Win10_1607_Danish Home_Pro_x64.iso,format=raw,if=none,id=drive-sata0-0-0,readonly=on' \-device ide-cd,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0,bootindex=2 \-drive file=/mnt/user/isos/virtio-win-0.1.160-1.iso,format=raw,if=none,id=drive-sata0-0-1,readonly=on \-device ide-cd,bus=ide.1,drive=drive-sata0-0-1,id=sata0-0-1 \-netdev tap,fd=35,id=hostnet0,vhost=on,vhostfd=36 \-device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:ed:05:fe,bus=pci.1,addr=0x0 \-chardev pty,id=charserial0 \-device isa-serial,chardev=charserial0,id=serial0 \-chardev socket,id=charchannel0,fd=38,server,nowait \-device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 \-device usb-tablet,id=input0,bus=usb.0,port=2 \-device vfio-pci,host=0000:0c:00.0,id=hostdev0,bus=pci.4,addr=0x0,romfile=/mnt/disks/ST1000DM010-2EP102_Z9AH9WFJ/Vega64.rom \-device vfio-pci,host=0000:0c:00.1,id=hostdev1,bus=pci.5,addr=0x0 \-device vfio-pci,host=0000:05:00.0,id=hostdev2,bus=pci.6,addr=0x0 \-device usb-host,hostbus=5,hostaddr=3,id=hostdev3,bus=usb.0,port=1 \-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \-msg timestamp=on2020-02-12 17:05:50.032+0000: Domain id=2 is tainted: high-privileges2020-02-12 17:05:50.032+0000: Domain id=2 is tainted: host-cpuchar device redirected to /dev/pts/0 (label charserial0)



    Sendt fra min SM-G950F med Tapatalk

    Downgrade too 6.8.0

    in General Support

    Posted

    Hi are there a way too do that have some big problem getting my VM too work with passthrough off my vega 64 and have read one there have some similar problem after he upgrade too 6.8.1 and 6.8.2 so like too see if it will help 

    Problem after created new Win 10 VM

    in VM Engine (KVM)

    Posted 

    -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2020-02-11 09:18:39.187+0000: Domain id=5 is tainted: high-privileges
2020-02-11 09:18:39.187+0000: Domain id=5 is tainted: host-cpu
char device redirected to /dev/pts/0 (label charserial0)

    Hi have got a old VM create before 6.8 but have problem with a game and have change GPU so think i will make a clean one 

    It was created way back with a  Nvidia 970 but run fine with a Vega 64 .

    So create a new vnc work  but just black screen with gpu passthrough 

    It log say sorry don't know why it are at top.

    Have try too Google it but just got more confused too say I find one there have something there sound the same

    He fix it when he got back too 6.8  can I still that ?was on 6.8.2  and have try 6.8.1 same problem.

    Sorry for any misspelled and . And ,  problems if you need more info I have forgotten just ask

     

    tower-diagnostics-20200211-1034.zip

×
×
  • Create New...