francishefeng59

我也是用手动安装解决的，有没有彻底解决的办法？按社区的办法都试过，有些插件下载还是会出现ssl验证失败

sas盘有补丁的，但希捷的sas盘不支持

我曾经遇到过同样问题，可能是6.9.2的休眠机制不同吧。6.9.1或6.10磁盘休眠都正常。

各位好。本人一直用6.9.1版，最近突然经常出现开机无法登录界面，检查发现板载网卡未启动（本人设置板载网卡为eth0管理网卡），再检查配置文件发现上述配置文件消失，造成系统没有管理网口。之前一直没遇到过这个问题。我把这个文件复制到config下，恢复正常，但过几天发现文件又丢失了。请教各位怎么解决。感谢

感谢分享，希望继续更新

I have been running 6.9.1 for a while. Recently i have found sometime i failed to connect to unraid. Checking the connection i found the onboard NIC which was assigned as the management port was dead. Through further check i also found the file "network-rules.cfg" was nowhere to be found (self delected). After the .cfg file was added the connection resumed. Anyone who can advise me how to fix it? Thanks

感谢指导

感谢分享

运行近一年后前天parity盘前突然出现红×，检查smart无error记录。采取停止阵列，摘掉、再挂上的办法，后进入数据重建，一会儿竟出现大量读错误，由一块盘发展到4快盘，还包括parity盘本身，且重建时间非常缓慢，只有30m。不得已停了数据重建，重启后parity盘不可用，其他盘都正常了。然后再试过全新设置阵列，还是出现上述问题。没办法，现在是裸奔。请教各位是什么问题，如何解决。先谢了

是6.9.2自身的问题，6.9.1可以spindown，但似乎休眠的硬盘数没有6.8.2多，我14块硬盘在6.8.2下可以休眠10块，4块sas盘休眠不了，但在6.9.1下最多休眠6块

Thanks, buddies After testing every possible option under your kind help, I finally got them to work togather or stand-alone. I am giving a brief summary here for reference. 1. privoxyvpn works perfectly, through which all the following apps get connected to the internet. 2. Not sure if I've done sth incorrectly. radarr and sonarr failed to pass-through privoxyvpn even if I set up proxy connection in the "General" menu. I now have them routed to privoxyvpn using the method given by Mr. Spaceinvaderone (many thanks too) and they are working pretty well. So is sabnzbd.

Hi, After running a day, another problem came up. Once the internet connection was down or it lost connection after being idle for some time , it wouldn't re-establish connection even when the internet was up or tasks were imported waiting for being downloaded. I have to restart them manually. I've tried sabnzbdvpn and nzbgetvpn, all giving me the same issue. Privoxyvpn works ok. But I failed to find how to get them to work on privoxyvpn. Any idea? Part of the log after the internet is up: 2021-11-18 10:44:31,537 DEBG 'start-script' stdout output: 2021-11-18 10:44:31 TCP/UDP: Preserving recently used remote address: [AF_INET]23.19.87.116:1194 2021-11-18 10:44:31 Socket Buffers: R=[212992->212992] S=[212992->212992] 2021-11-18 10:44:31 UDP link local: (not bound) 2021-11-18 10:44:31 UDP link remote: [AF_INET]23.19.87.116:1194 2021-11-18 10:44:31,537 DEBG 'start-script' stdout output: 2021-11-18 10:44:31 write UDP: Network is unreachable (code=101) 2021-11-18 10:44:31 Network unreachable, restarting 2021-11-18 10:44:31 SIGHUP[soft,network-unreachable] received, process restarting 2021-11-18 10:44:31,538 DEBG 'start-script' stdout output: 2021-11-18 10:44:31 OpenVPN 2.5.4 [git:makepkg/3f7a85b9aebe7be0+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Oct 5 2021 2021-11-18 10:44:31 library versions: OpenSSL 1.1.1l 24 Aug 2021, LZO 2.10 2021-11-18 10:44:31,538 DEBG 'start-script' stdout output: 2021-11-18 10:44:31 Restart pause, 5 second(s)

@mattz, @Roudy Thanks again. It was the port 1194 problem which was unreachable. Now it's working ok.

@mattz, Sorry, I failed to find vpn.crt file on its webpages. Mind giving the link. Thanks.

Thanks, @mattz, @Roudy No luck today. It refuses to work. I think the problem for me may be pin-pointed to network connection, where I can't figure out the problem. It works perfectly after disabling vpn. @mattz, Let me see if I can find it and try again. By the way, the log is attached. supervisord.log

HI, @mattz Seems to me your sabnzbdvpn worked with Privadovpn before Nov. 4. Am I right? Unluckily I've never got it to work since i tried. Appreciate if you can tell me any particular setup I need to care about. I am thinking I might have missed sth or made some incorrect configuration especially relating to the network. Who knows. But disabling vpn makes it work happily.

I am having the same trouble, same wrong messages, but my connection to newshosting is ok. Looking forward to some big guys for help.

Many thanks @Roudy I removed the sabnzbdvpn few days ago since I was unable to get it to work. To show you the log and .ovpn file I pulled down and ran it again. Weirdly it is working now without showing "Options error: Unrecognized option or missing or extra parameter(s) in /config/openvpn/nrt-004.ovpn:22: data-ciphers (2.4.8)". But on Binhex's Privoxyvpn I am trying now it still keeps giving the above error message. Please find attached here the log of the privoxyvpn along with the .ovpn file from Privadovpn. Again thanks. supervisord.log akl-001.ovpn

Hi, Thanks for your reply. Unluckily my connection to the vpn provider failed maybe just because the build-in openvpn version is too low to recognize aes-256-cbc in the config file, which requires at least 2.5.0 or above while the build-in one is 2.4.9. Not sure if i am right or not, but it was given in the log. Have tried quite a few vpn apps, all of which have the same issue of failing to recognize aes-256-cbc. Do you have any suggection?

Thanks, got it.

Many thanks for the reply. Awaiting improvement. One more question. Does it affect the normal operation of unraid system or the disks if I still want it to work under error warnings?

Hi, I have switched from sabnzbd to sabnzbdvpn in order to use privadovpn. After configuring and importing ovpn.config, I failed to log onto the webui nor could radarr and sonarr connect with it. Disabling vpn, it works greatly. Appreciate if anyone tells me where i am wrong.

Hi, Thanks for this plugin, which ran partially well on my system 6.9.1. After installing it, 12 of my 14 drives (4 sas drives ST6000NM0034) spinned down, bringing down a lot power consumption. But once spinning up, 2 of the 4 sas drives gave tens of errors, which returned to "0 disk with errors" following a reboot. Now I've removed it and never been given error warnings again. But power saving function doesn't work as efficiently as it is enchanced by this plugin.