janeh812

好的，我来试试，谢谢！

前几天操作不当，导致阵列里的一块硬盘被判故障，重新挂载加恢复数据后这块盘仍旧在阵列里运行，但是主界面下面Historical Unassigned Devices里显示这块盘，不知道能不能直接点那个红色的X？点了会不会又破坏阵列？或者还有其他处理方法？

The card is turned off in the array, and now it is hard powered off by pressing the power button directly

应该就是卡在阵列那里了，现在手动硬关机了

web页面又登不上了，只能通过SSH了

周末升级到7.0.0，然后更换了一个交换机，当时忘插网线了，发现登陆不了web页面，也没有发现网线的问题，按了下reset键，重启后还是无法登录web页面（没插网线）发现网线问题后，插上网线也没有用，然后就再次按下reset键，这次是进去了，但是有一个硬盘报错，我让系统阵列自己修复，修复完了，想重启下替换错误硬盘，发现不能重启，一直卡在阵列关闭中

你好，请问你是重新安装的unraid7吗？

I used the htop command and found that syslogd.pid was taking up 94% of the CPU

After upgrading to unraid7, I replaced a switch, unraid could not be turned on, after pressing the power button to force shutdown, a hard disk reported an error, waiting for the array self-test and could not be restarted, the array kept showing that the array is stopping. I'm ready to manually close docker via SSH, but I also keep getting stuck. So I don't know if there is a command to force a restart?

SSH can't get in either

OK！Thanks! After reboot,Unraid returns normal. There is still a problem. After the unraid system entered, it was automatically checked, but after ten minutes, I couldn't log in to the web again, and the connected monitor also showed no signal, and the machine seemed to be still running.

Doing so will cause damage to the hard drive？

First of all, thank you for your help! I tried pressing the power button but nothing happened, it seems that this method is not working.

I can't enter the system right now, the server is on, and the keyboard light doesn't even light up, so I can't turn it off. It's just that I'm afraid of damaging the hard disk, so I didn't force it to shut down. Is there any way to close?

What should I do if I reboot after upgrading unraid7 and the WEB is inaccessible and the connected monitor is not displayed?