unbeatable

I have set appdata, domains, isos, and system folders in Appdatavm as primary storage and secondary as none in pool drive. Somehow it moves to cache drive and disk1. How do I fix it?

@JorgeB My unmountable drive is cache. What disk ID do I use for BTRFS restore? btrfs restore -v /dev/md? /mnt/disk2/restore

@JorgeB Sorry, I didn't get a chance to work on it since then. If I have to reformat, could you please guide me through the necessary steps to ensure that my data remains intact? Additionally, I'm interested in transitioning to a new system equipped with a different CPU and motherboard. What step should I follow?

@ChatNoir Please see attached zip file. tower-diagnostics-20220719-2305.zip

Unraid reboot and now my cache drive showing error. What could be the reason? How do I fix this?

I was able to boot Unraid by choosing manually in BIOS boot options. I think I screwed up something in Fix Common Problems plugin when it was running ok. Do you think it's better for me to recover from my flash drive backup at this point?

happened after updating Unraid OS and reboot. I didn't update BIOS.

I'm stuck in boot menu in BIOS Yes, I do have backup from Aug 2019.

Can someone help me what to do next?

Hi, My server is up and running for 10 years. Last firmware update messed up my boot drive. After rebooting, it's not booting back to Unraid OS. My booting order is correct. I did first aid in MacOS to repair the USB if there is any issues but no luck. How do I troubleshoot the issue? Please help!

Hi, I am having issue with one of the hard drives. It failed and dropped out of array. So, I replaced it with a new hard drive. After it's up and running, I see error as below. Can someone tell me what is going on? Apr 27 00:08:53 Tower kernel: ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen Apr 27 00:08:53 Tower kernel: ata3.00: irq_stat 0x08000000, interface fatal error

Thanks I'll look into it.

Thanks, BRiT! Anything I can do to clear the warning?

Hi, I noticed on the dashboard page, I see two of my hard drives have yellow warning sign on SMART status. I did smart short self-test and they both completed without error. Do I need to worry about anything? I hope someone can help me with this. Disk 2: Western Digital Red [4TB] highlighted on #5 Reallocated sector count ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 182 051 Pre-fail Always - 483 3 Spin_Up_Time 0x0027 182 182 021 Pre-fail Always - 7875 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 297 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 94 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4506 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 711 194 Temperature_Celsius 0x0022 129 113 000 Old_age Always - 23 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 Disk 3: Seagate Barracuda 7200.11 [1.50TB] highlighted on #5 Reallocated sector count and #188 Command timeout ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 62858346 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 4041 5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 157 7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 56202053 9 Power_On_Hours 0x0032 064 064 000 Old_age Always - 31801 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 12 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 675 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 094 000 Old_age Always - 274882101314 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 236 190 Airflow_Temperature_Cel 0x0022 075 046 045 Old_age Always - 25 (Min/Max 17/28) 194 Temperature_Celsius 0x0022 025 054 000 Old_age Always - 25 (0 14 0 0 0) 195 Hardware_ECC_Recovered 0x001a 047 026 000 Old_age Always - 62858346 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 193 000 Old_age Always - 12356

I just installed SSD for my cache drive. What is the best way to find out my transfer speed?

can someone help me out? I can't connect to my folder anymore.

http://cgi.ebay.com/1-e-SATA-5-Port-SATA-II-Raid-PCI-express-PCIe-x1-Card_W0QQitemZ250560207965QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3a568d5c5d This one is for : US $84.99 is this one any good?

Ok guys. I got it working now. YES... took me about 2 full days to make it work. I tried so many other guides out there but no luck trust me I tried every guides out there. Including unpluging the ethernet cable while processing the backup lol. Anyway, Here is the only guide that help me out. I got it from http://www.jordanpeterson.me/node/118 By:Jordan Peterson. I know It's long but trust me it's very easy guide. I love unRAID server so much that decided to help out the community. Follow step by step you will get it work. Let me know. Good Luck... Manual Time Machine Image Creation: You'll need to create a Time Machine Image and copy that image into the remote share, or else Time Machine will begin backing up and fail every time. Since the site I pulled an automated shell script from is not coming up at the moment, I'll list out the manual approach. Pull up a Terminal (on the MAC, not the Linux box) again and type out a command using the following guidelines: sudo hdiutil create -size g -type SPARSEBUNDLE -nospotlight -volname "[Volname]" -fs HFS+J -verbose ~/Desktop/[computer_name].sparsebundle The above Mac command line needs your input. Here is an explanation of what the elements are that need your input: = Size in Gigabytes that the backup image can grow to. Obviously, the image size should be more than the Mac hard drive. In my case, my Mac drive is 160G. I chose 250G backup image size. The bigger, the more increments you'll have back in time to restore from. [Volname] = Name of the backup image [computer_name] = the verbose name of the computer. You can find the name of your Mac by clicking Apple menu in upper left corner, System Preferences, and Sharing. In my case, the following image creation line worked for me within the Terminal: sudo hdiutil create -size 250g -type SPARSEBUNDLE -nospotlight -volname "Mac Book Pro mb0 backup" -fs HFS+J -verbose ~/Desktop/mb0.sparsebundle This line will create an image called mb0.sparsebundle on my Desktop. We then want to copy the newly created image to the shared volume. cp -rp ~/Desktop/[computer_name].sparsebundle /Volumes/[share]/ Where [computer_name] is your computer name.. mine is mb0.. Basically the file you created.. We're copying it over to the mounted share, which you've given your share a name.. We'll call it share for purposes of this guide. While you're typing the above line, when getting into the section called "/Volumes/", you can hit tab a few times and a few names will come up as suggestions. Once the image has been copied over, you'll want to create a file within the image directory that you just created. nano /Volumes/[share]/[computer_name].sparsebundle/com.apple.TimeMachine.MachineID.plist Again, [share] is the name of your share and [computer_name] is the name of your computer. Nano is a text editor. <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.apple.backupd.BackupMachineAddress</key> <string>MAC_STRING</string> <key>com.apple.backupd.HostUUID</key> <string>UUID_STRING</string> </dict> </plist> copy everything and paste into the Terminal where you've ran the nano editor on the newly created file. You'll need to change two lines in the file before you save within the nano editor. The first thing to change is the MAC_STRING to match your machine. I was able to get this by running in another terminal window: ifconfig en1|grep ether Where en1 is the device I'm using, as I am using the Wireless card, not the wired network. Copy and paste everything from after "ether".. This is the MAC Address. Put this in newly created nano editor file that you have open where it says "MAC_STRING".. That line now should now read <string>00:11:22:33:aa:bb</string> or similar. The next thing to change is the UUID_STRING. You can find this under Apple Menu, About this Mac, click More Info..., and there should pop up an entry in the list on the right saying Hardware UUID. Copy and paste this number in place of the UUID_STRING in the file you're editing. Once done, hit [Control]+[x] to edit the nano editor. Hit [y] to save, and [enter] to confirm the file. Open up a Finder window.Click GO from the upper menu bar and Connect to Server. Type in smb://[ip]. [ip] being the IP address of the Ubuntu machine. Click Connect. Open Time Machine. Slide the slider to ON. Click Select disk. From the list, click your share and click Use for Backup. Time Machine should backup! Let me know if it's working...

Can't wait for someone show up. So, I ended up ordering just one key for myself. lol Tom hurry...

I can't back up my mac with time machine. It says "Time Machine could not complete the backup.The backup disk image ".....sparsebundle" could not be created." (error45) Help me out Edited: I got it working now look below

15000000 would be approximately 15GB Thank You so much...

If I want to put 15gb in Min. free space, what number do I put in there?

2 Keys for $150. So, It will be $75 each. Let me know. We can do ebay transaction or Paypal. We can work it out somehow. PM me.

I got it fixed. It was the USB problem not because of the Volume label. It was something else. After I change it to sandisk USB everything working fine. Thanks for the help guys..

Without mapping anything, what happens when you type "\\tower" (without the quotes) into the address bar of a Explorer window? (and I don't mean internet explorer) It says "Winows cannot access \\tower ...."