Trollski

Yes the array just holds the VMS docker etc and the usb stick controls the system

Have you set the array to autostart on boot? I cant remeber which config it is in but I know that one has the setting to disable the autostart of the array if that helps?

@klepel - Thanks for your sugestion I did try setting up Mlans but it also seemed to make no diffrence, I even tried some of the docker codes to make the a vlan bridge and trunks and all sorts of things. The amount i have cleared the stick and reinstalled is a little crazy now but looking at docker this should be do-able by the docker network create command but does not seem to actually work or I maybe just been stupid 😃

Small Bump... I have also set Vlans and also bridge mode and none of these cause the settings to show when settings up or changeing the dockers netowrk. Maybe som eone has some links to some readin?

Doh.... I know that feelin, That was my first mistake 😃

On the screen where it shows you the login promt and you enter root just before it should show you an IP Adress also could check the DHCP listings on the router / switch or simply see if any lights are blinking showing it can see a network

Thanks for confirming squid - Great work by you and the team on the CA 😃

Ah ok, Yes thats great, If you hit advanced and continue it will take you to the page of the Webui its ever since Chrome and others all went to https as standerd

When you boot it headless do you drop to a login prompt or does it also black screen? Also when booting do you get the blue menu to select an option? 6.9 has a web UI

Hmmm, Might be worth disabling one of the isolation cores and see what happens might be locking up some where, Other then that im about as stumped =/

Hey, Are you able to drop a screen shot of the pinning / isolation settings?

Hey 😃 Quick search took to me Red.... They have mentioned Qdirstat which is advised it is avalible in the community apps? https://github.com/shundhammer/qdirstat

Hey, Also a Newbie so please forgive if its something you also may have tried.. 😃 Have you tried without Isolation to see if this will then boot?

Greetings Gents and Ladies, I have been playing around and reading multiple posts and testing settings and getting frustrated and giving up only to try more not long latter. I am unsure if what I am trying to do is actually possible but it seems it is from various posts, maybe I am reading them wrong or reading more in to them in frustration. I have a Dell r710 Server with 4 onboard Eth ports and a 2 port GB Eth card in the server so have Eth ports 0 to 5 in the unraid network settings, 4 and 5 been the addin card. I have a home network provided by an ISP router which then which is 192.168.1.x range which then feeds in to 1 POE switch and then in to another which is where the server / other machines are. What I would like to do is have some dockers on diffrent Eth Port as like below - Eth1 - Docker1 Docker2 Docker3 Docker4 Eth2 - Docker5 Docker6 Docker7 Docker8 I curently use Eth0 for direct access to the Unraid Web UI under 192.168.1.20. Things I have tried - Settings IP's to automatic to obtain DCHP leases and selecting the networks in the Docker Settings Settings the IP's to Static and selecting the networks in the Docker Settings Setup Bridges on Eth1 and Eth2 so Have Br1 and Br2 and selected these in docker settings Manually configured IP's Gateways and also DHCP pool on Docker settings Disabled IP assignment on the network interface in settings page and brough the port up with no IP settings and configured in the Docker Settings Changed "Preserve user defined networks:" and "Host access to custom networks:" to multiple options like both on both off one on one off on each step / configaration. Can some one put a desperate guy out of his missery and confirm if this can be achived or not? and if so how? TIA - Trollski