maddox-nola

I just plugged it into a different usb slot, one that I had before I moved the pc. I not sure if it makes a difference.

I did notice that my flash drive was plug into another usb port on the back of the pc. I am not sure if this was the problem or not. It would not let me start my array. I move it to the same usb port and looks like the array started and it booted up with no problem. Do you think I still have a problem with my flash drive? I will attach a diagnostics report also. Archive.zip

Guys I just received a fatal flash drive error. Version 6.12.8

I am not sure because I replaced the drive. I was going to use this as a backup drive now to store files offline.

Guys, I used to have this hard disk in my array and I removed it last week. I have it plugged up to an external case through a USB cable to test the drive. It is a 3 TB WD blue hard disk and it is showing that it has only 802 GB. Did the drive fail and or crash? I will include a screen show. Can options do I have? Is it possible to remove the partition and redo the partition and then a format? Thanks for your help.

No, I am not sure why I have so many? Can I delete them. Yes I do have only one cache drive. Thank you for looking over the report.

Here is the diagnostic log, the Parity drive is 4 TB. tower-diagnostics-20230506-1014.zip

Is this normal it is telling me 130 - 300 days to finish. It is jumping all around in numbers up and down. I have 3 data drives with about 4.8 TB's of data used and about 6.19 TB free.

After playing around with the cables and replacing some. I didn't have too much luck. I replace the new power supply with an old power power supply and all the drives came up good. This is freaking strange. This is a new power supply out the box. It is now Parity-Sync is started and the Parity-Sync in progress. This is great news.

The only thing I have now is Parity is disabled, Do I try and rebuild parity? How do I get the drive from disabled?

I just wiggle all my hard disk cables and disk 2 is now green.. but I still have an "x" for parity.

Guys, I am not sure what happen I ran read check last night and this is what I found early today. Disk 2 started getting all kind of error's. Did the drive fail? What should I do to get out of this pickle? tower-diagnostics-20230505-0813.zipScreenshot 1

I received the card in today and dropped one of my spare hard disk can installed it as a Cache and the server transfer rate is flying now. Much faster for sure. Next week I will look into added another data drive. Thank you again for your help here.

Thanks, I will try that soon.

I removed the spare drive and installed a new used drive as a cache drive and the errors cleared up and returned to normal operation.

Do you think the drive is going out?

Guys, I had a used 1 TB drive laying around and I installed it in my system and I have this notification. What should I do to fix this? Anything?

Thank you,

Would this one work. https://www.amazon.com/FebSmart-Expansion-System-Marvell-Controller-FS-S4-Pro/dp/B08LW3XXYG/ref=sr_1_1_sspa?crid=2BM0TX119TEPC&keywords=Asmedia+ASM1064&qid=1680024081&s=electronics&sprefix=asmedia+asm1064%2Celectronics%2C186&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExU1k2S1pXVFhUN05XJmVuY3J5cHRlZElkPUEwNTM5NjU4S1JQWTJPUEpVMzJTJmVuY3J5cHRlZEFkSWQ9QTA1ODg3ODUyT1c4REZNMldOWVU0JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

I was looking at this card, what do you think? https://www.amazon.com/gp/product/B07VZZ11GB/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VZZ11GB&linkCode=as2&tag=warehousealve-20&linkId=ee801a7a5cb5c9cb81147ebdaf2912c5

I don't have any more problems. Thank you.

Guys, I am using an old Dell as my unRaid system. Dell Inc. 0C2KJT , Version A00 Dell Inc., Version A07 I now have 4 - 4 gb drives and the mother board is full, I would like to get a PCIe or another card to add more hard disk. Can you get me some direction on what card I should get? Also I have a 300 watt power supply, should I upgrade if I add 2 or 3 more drives.

Hey Guys, My disk 2 did fail, it started making a noise like clicking hard. This drive was less then a year old. I ended up pulling out the drive and replacing it and rebuild the files and everything cleared up. All the drives are now up and running.

Thank you, I will try that option. I think it had only one PCI slot.

I found the power cable was not correctly and fix that, I now have a "x" on disk 2 and has the original name. Does this mean that the drive crashed?