atsrxL
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Everything posted by atsrxL
-
Yeap, I tried ssh to synology and modified its upsmon.conf , then ran upsmon , it worked . but in the webui setting it will overwrite config. I'll try some workaround when I'm spare. Overall, very thankful to you for solving my problem.
-
The another requirement of synology slave is that ups name should be "ups" other than "qnapups" , I tried add a [ups] section in ups.conf with same port , its won't work.
-
Synology will also work as ups name:ups username:monuser pass:secret , but the tricky thing is this , a nut server can't use two identifaction at same time , thus I'm trying to use SNMP ups mode if NUT can provide.
-
Hi sorry for bother you again, Is Nut work as SNMP ups server ? I have a Qnap nas and also a Synology nas , set Nut as netserver with qnap default username and password would work fine, but on synology it only give the option of USB / SNMP and synology serverd nas as source. any suggistion?
-
sorry for the reply , it works , forgot to enable the service on/off switch, thanks very much
-
Had tried but still not working
-
Model : UPS2000-A-3KTTS https://support.huawei.com/enterprise/en/doc/EDOC1000084260 Here the newer debug package nut-debug-20231025001422.zip
-
Thanks for reply , the pic of showing elder backend is just a try, does't work also on the default backend, and based on huawei's ups menu i'am sure that modbus is on, any other suggistion?
-
Hi , I'm using a huawei UPS which use ModBus a protocol as connection method, I noticed on the newest version of Nut can select UPS Driver to apc_modbus , when I choose and set Driver port to USB or /dev/ttyUSB0 in standalone mode also keep other setting default , it does't work . there are no any information on screen only ''status:service stopped'' at right corner. Can you please give a hand on this ,thank you. nut-debug-20231024235612.zip
