Alexandr

Hy guys. So i need a bit of help. I changed my gear a bit and afterwards i installed Plex binhex edition. Got everything to work, except my Haupage 4 dvb card. I tried everything, adding a new device, an old answer in this thread of adding --device=/dev/dvb/ in extra parrameters, i could not get it working. I installed the dvb driver, went with the libereelec version, i can see my dvb tuners in the dvb drivers page. I even ran, in plex(binhex) terminal the ls /dev/dvb, and my tunners appeared, but they would not load in the plex server settings, under dvr and livetv. So, after reading a bunch of post, from the plex section, from the dvb driver section, i uninstalled plex binhex, installed plex linuxservers. Now, by doing this, adding extras parameters for nvidia and vor dvb tunners, it works. My only grief is that the transcoding works on some movies, not on all - with an erros that says that something went wrong. I even waited for my media to load with everything - also read i can get errors while the libraries are updated. With the Binhex edition, transcoding worked perfectly, not a glitch, after some settings for transcoding. I even got my plex(binhex) installed on a ssd, so the media would load faster(pictures, trailers, etc.). My question is: Has anyone found a setting, or something so that i can make my plex(binhex) to see the dvb card in the plex tab/app/ip settings, or what settings/workaround is the for that the plex(linuxserver edition) to stop giving me errors when i try transcoding? If you guys say i should post this in a different part of the forum i will and i ask for your help because after5 years of linux/unraid i think these forums are filled with people with great knowledge. Thanks in advance, and sorry for taking up your time. If there is need for more information, I will give it. Thanks! Sorry for repost, i first asked in the plex linuxserverio thread.

Hy guys. So i need a bit of help. I changed my gear a bit and afterwards i installed Plex binhex edition. Got everything to work, except my Haupage 4 dvb card. I tried everything, adding a new device, an old answer in this thread of adding --device=/dev/dvb/ in extra parrameters, i could not get it working. I installed the dvb driver, went with the libereelec version, i can see my dvb tuners in the dvb drivers page. I even ran, in plex(binhex) terminal the ls /dev/dvb, and my tunners appeared, but they would not load in the plex server settings, under dvr and livetv. So, after reading a bunch of post, from the plex section, from the dvb driver section, i uninstalled plex binhex, installed plex linuxservers. Now, by doing this, adding extras parameters for nvidia and vor dvb tunners, it works. My only grief is that the transcoding works on some movies, not on all - with an erros that says that something went wrong. I even waited for my media to load with everything - also read i can get errors while the libraries are updated. With the Binhex edition, transcoding worked perfectly, not a glitch, after some settings for transcoding. I even got my plex(binhex) installed on a ssd, so the media would load faster(pictures, trailers, etc.). My question is: Has anyone found a setting, or something so that i can make my plex(binhex) to see the dvb card in the plex tab/app/ip settings, or what settings/workaround is the for that the plex(linuxserver edition) to stop giving me errors when i try transcoding? If you guys say i should post this in a different part of the forum i will and i ask for your help because after5 years of linux/unraid i think these forums are filled with people with great knowledge. Thanks in advance, and sorry for taking up your time. If there is need for more information, I will give it. Thanks!

Thank you so much. Inserted the line you said, transcode still works, dvb works. Now to learn more about adding devices with /dev/dri. Again, thank you, and sorry for the, what seems to be, a noob question.

Hy guys. I need your help for plex. I just changed gear, going from a 5600g on an AM4 motherboard, that would transcode with the internal APU, to a dual processor platform. My problem is this: I used to have a dvb card that i added, using the extra parameter ”--device=/dev/dvb”. I now have an 1060 for transcoding and i added, in the extra parameter line ”'--runtime=nvidia”. My card is transcoding, but how can i add the line for my dvb card, as the extra parameter line is now occupied by the nvidia line. Sorry if there is an answer somewhere, for the life of me, i did not find it.

Hy guys. I am kind of new to plex and Unraid, and I need your help. So: approximately a month has gone by since my plex docker stopped hardware transcoding. My setup is a x370 asrock fatality gaming pro, paired with a 2700x, 32gb of ram and a 1060 6gb. My plex docker used to work, as in hardware transcoding. What pictures or details would be useful in sorting this problem? What I tried: upgrading Unraid, downgrading unraid, different nvidia drivers, reinstall my plex container. My unraid version is 6.9.2(just downgraded, as the newer version of unraid did not make a difference). ps: i have read all newer post on the forum about plex/nvidia not hw transcoding, tried about everything, but still, no results. If I should have posted in a different part of the forum, I do apologize.