limitz

I'm having this issue as well after updating to 6.12.16. Has never happened before this update. It is not an adblocker issue as I have that turned off. Is anyone else experiencing this? Console opens up for a second and immediately closes by itself.

So reboot the system to purge the log. Then because nginx has been removed, the problem shouldn't come back?

>When you open the syslog window do you have stuff scrolling by endlessly or is it quiet? Interesting, it's a ton of nginx error messages: Mar 26 03:17:13 LIBRARY nginx: 2023/03/26 03:17:13 [error] 31026#31026: nchan: Out of shared memory while allocating message of size 503. Increase nchan_max_reserved_memory. Mar 26 03:17:13 LIBRARY nginx: 2023/03/26 03:17:13 [error] 31026#31026: *33427723 nchan: error publishing message (HTTP status code 500), client: unix:, server: , request: "POST /pub/devices?buffer_length=1 HTTP/1.1", host: "localhost" Mar 26 03:17:13 LIBRARY nginx: 2023/03/26 03:17:13 [error] 31026#31026: MEMSTORE:00: can't create shared message for channel /devices I added that docker a few days/weeks ago, but haven't bothered to configure it since. I just removed it.

It's taking a lot longer than a few seconds, and crashing after a few minutes. It looks like its writing the diagnostic log file with every file I have in unRaid. root@LIBRARY:~# du -h -d 1 /run 0 /run/containerd 48K /run/libvirt 32M /run/docker 4.0K /run/avahi-daemon 0 /run/rpcbind 0 /run/samba 0 /run/cron 4.0K /run/elogind 0 /run/user 4.0K /run/dbus 4.0K /run/hook-state 0 /run/faillock 0 /run/lock 0 /run/lvm 304K /run/udev 0 /run/mount 8.0K /run/blkid 32M /run

When I check for updates, I get the following message: "Checking connectivity ... No response, aborting!" I think it's related to that full log file since there is Internet available across my dockers. --- Stupid question, when after I kick off Diagnostics from "Tools -> Diagnostics", do I just need to leave the WebUI open on that page for a few hours? If I leave the page, does the Diagnostic process stop? The webUI looks like it hangs for multiple minutes at a time - not sure if there's a better way or if I just need to wait it out. I have a lot of files, so it could take hours. EDIT: webUI just crashed on Chrome when running Diagnostics...

Hello - Community applications was working for 2+ months, but started getting this error recently: Warning: file_put_contents(): Only -1 of 54 bytes written, possibly out of free disk space in /usr/local/emhttp/plugins/dynamix/include/DefaultPageLayout.php on line 714 My flash disk, RAM, and array/cache disks have free space. When I run "df -h", I get the below output: root@LIBRARY:~# df -h Filesystem Size Used Avail Use% Mounted on rootfs 16G 3.7G 12G 24% / tmpfs 32M 32M 0 100% /run /dev/sda1 7.7G 668M 7.0G 9% /boot overlay 16G 3.7G 12G 24% /lib/firmware overlay 16G 3.7G 12G 24% /lib/modules devtmpfs 8.0M 0 8.0M 0% /dev tmpfs 16G 0 16G 0% /dev/shm cgroup_root 8.0M 0 8.0M 0% /sys/fs/cgroup tmpfs 128M 33M 96M 26% /var/log /dev/md1 13T 9.7T 3.2T 76% /mnt/disk1 /dev/md2 13T 9.6T 3.2T 76% /mnt/disk2 /dev/md3 13T 9.6T 3.2T 76% /mnt/disk3 /dev/md4 13T 9.6T 3.2T 76% /mnt/disk4 /dev/md5 13T 8.4T 4.4T 66% /mnt/disk5 /dev/md6 13T 6.4T 6.4T 51% /mnt/disk6 /dev/md7 13T 6.5T 6.3T 51% /mnt/disk7 /dev/md8 13T 6.4T 6.4T 51% /mnt/disk8 /dev/md9 13T 6.4T 6.4T 51% /mnt/disk9 /dev/md10 13T 6.4T 6.4T 51% /mnt/disk10 /dev/sdf1 932G 100G 829G 11% /mnt/cache shfs 128T 79T 49T 62% /mnt/user0 shfs 128T 79T 49T 62% /mnt/user /dev/loop2 20G 11G 9.3G 53% /var/lib/docker /dev/loop3 1.0G 4.1M 905M 1% /etc/libvirt Attached are my logs. CA-Logging-20230326-1034.zip This error is referenced in a similar thread, but it didn't seem like OP was able to identify the root-cause. https://forums.unraid.net/topic/132368-warning-file_put_contents-only-1-of-100-bytes-written-possibly-out-of-free-disk-space-in-usrlocalemhttppluginsdynamixincludedefaultpagelayoutphp-on-line-714/ Does anyone know a more permanent fix for this, or a resolution without having to reboot the server? Hoping for a way to purge that log file.

Started getting the same error last night. Running "df -h" shows this: root@LIBRARY:~# df -h Filesystem Size Used Avail Use% Mounted on rootfs 16G 3.7G 12G 24% / tmpfs 32M 32M 0 100% /run /dev/sda1 7.7G 668M 7.0G 9% /boot overlay 16G 3.7G 12G 24% /lib/firmware overlay 16G 3.7G 12G 24% /lib/modules devtmpfs 8.0M 0 8.0M 0% /dev tmpfs 16G 0 16G 0% /dev/shm cgroup_root 8.0M 0 8.0M 0% /sys/fs/cgroup tmpfs 128M 33M 96M 26% /var/log /dev/md1 13T 9.7T 3.2T 76% /mnt/disk1 /dev/md2 13T 9.6T 3.2T 76% /mnt/disk2 /dev/md3 13T 9.6T 3.2T 76% /mnt/disk3 /dev/md4 13T 9.6T 3.2T 76% /mnt/disk4 /dev/md5 13T 8.3T 4.5T 65% /mnt/disk5 /dev/md6 13T 6.4T 6.4T 51% /mnt/disk6 /dev/md7 13T 6.5T 6.3T 51% /mnt/disk7 /dev/md8 13T 6.4T 6.4T 51% /mnt/disk8 /dev/md9 13T 6.4T 6.4T 51% /mnt/disk9 /dev/md10 13T 6.4T 6.4T 51% /mnt/disk10 /dev/sdf1 932G 252G 678G 28% /mnt/cache shfs 128T 79T 49T 62% /mnt/user0 shfs 128T 79T 49T 62% /mnt/user /dev/loop2 20G 9.9G 9.6G 51% /var/lib/docker /dev/loop3 1.0G 4.1M 905M 1% /etc/libvirt Disk, RAM, and flash drive have plenty of space. Did anyone resolve this yet? CA-Logging-20230326-1034.zip