creon

Members
 View Profile  See their activity

  • Posts

    17

  • Joined

  • Last visited

 Content Type 

Everything posted by creon

  1. creon
    Thanks to William I managed to update the bios trough ipmi (I never worked with this) Apparently the quick flash before did not work, never managed to see if the flash was successful Now my new system starts perfect
  2. creon
    I put 1 strip in the a2 slot and it started I looked in the bios and restart Then the same error appears Checkt alle the other slots same error Put the other strip in the a2 slot and it started again, but unfortunately only once Tomorrow I gonna try to flash the bios when I get there
  3. creon
    I'm using 2 module's from Samsung M391A4G43MB1-CTD When power on, I see a lot of messages on screen, like the motherboard is setting up, number sort of counting down When it comes to 72 it stops Also the display on the motherboard count's the same way
  4. creon
    Unfortunately it did not work Connected a screen and it sticks with this message DXE southbridge initialization... 72
  5. creon
    Yes, but how do I reset the cmos Just pull out the battery and wait?
  6. creon
    Just received my mother board cpu and memory Installed all pressed the power button Error 11 on the motherboard display Can't find how to reset the cmos Also can't find the meaning of the code 11 Can someone help me?
  7. creon
    planning to add some drives then i gone add a ssd cache disk for all the dockers
  8. creon
    /mnt/disk1/appdata/unifi/ was /mnt/user/appdata/unifi/
  9. creon
    it's working now unraid version 6.2.4 AppData Config Path:/mnt/disk1/appdata/unifi/ <------ that was my problem
  10. creon
    removed all files for unifi and try to re add the docker same problem logs from unraid says Nov 22 10:22:31 Tower shfs/user: err: shfs_write: write: (22) Invalid argument are there more settings i have to fill in or settings i have not fill in correct?
  11. creon
    i use dashboard - unifi - webUI (https://192.168.1.202:8443/) the error is can't connect to
  12. creon
    can some one help me the web ui won't open
  13. creon
    i have removed the old "hamachi-2.0.0.11-i686-unRAID.tgz" file from the packages folder also removed hamachi-conf.tgz from the config folder placed the new hamachi-2.0.1.13-i686-unRAID.tgz in the packages folder changed the line in the go script to "installpkg /boot/packages/hamachi-2.0.1.13-i686-unRAID.tgz" works fine fore me now only can't access my server from work, but thats a firewall issue i think
  14. creon
    there where more problems as mine with hamachi so logmein has a newer version of hamachi in there labs & betas could you please make new .tgz file fore unraid the problem i have comes trough i seems to have a to old processor with the newer version the must fixed that problem
  15. creon
    have placed the package in the right folder but as soon as i set the server as a hub the connection is lost and i get the "Hamachi does not seem to be running" "Run '/etc/init.d/logmein-hamachi start' to start daemon." line also if i do the "h2control save" i get "tar: Removing leading `/' from member names" this is before the change to hub action
  16. creon
    it's works i can add the unraid server to logmein takes me a wile to see were i can set the server as hub but i can't get it to work after i set the server to hub unraid seems to close te hamachi i get the "Hamachi does not seem to be running" line i have added the line "installpkg /boot/hamachi-2.0.0.11-i686-unRAID.tgz" to the go script placed the file "hamachi-2.0.0.11-i686-unRAID.tgz" in the boot folder on my flash drive and unraid created a file "hamachi-conf.tgz" in the "config" folder
  17. creon
    how do i get this running on my unraid server i would like that my parents can save a backup of there photo's on my server think that this must work fine for that