andreworkaholic

Thank you for taking the time to look into it.

Thank you for the reply Simon. I do have the cache pool that remains active all the time, but they are nvme SSDs that stay around 18-20 °C. I did try setting the "Low temperature threshold (°C)" to the minimum of 20 and adding these drives to polled hard drives to see if it would change anything, but it didn't seem to make a difference. I figured it was because they were operating outside the low threshold. Do I need to just keep one of the array drives active all the time? Thank you again.

Hello, Thank you for this plugin, it works really well with my Supermicro X10DRC board in my plex server. I have FAN1234 (the fan wall) being controlled based on HDD temp, but when the hard drives spin down after 8 hours of being idle the fans are defaulting back to full speed. I have also tried setting the temperature sensor to auto hoping that when the hard drives spin down the fan control will switch to being controlled by the CPU temperatures, but they still seem to default back to full speed regardless. If I set the temperature sensor to CPU, it works fine, but in my setup its not enough to control the temperature of the hard drives unfortunately. Is there something I'm missing in the settings that would help? Thank you in advance