joffles

Finally figured it out. A few months ago i had a failing memory module that took me a while to diagnose and would occasionally crash the system. The flash drive must have had some sort of corruption on it from the crashes. Replacing the flash drive fixed my problems.

I've been having an issue for the past few months off and on where unraid will crash and not leave any information about the crash in the logs. I've even set unraid to copy the the logs to the flash drive, but still nothing. When it crashes, it just has a black screen and is unresponsive, even through idrac. The only solution is a hard reset. I don't see any hardware errors in idrac, but i have seen an occasional CPU error in the syslogs so I think it could be a CPU problem. Did a full memtest86 on it for 6+ hours with no errors found. I upgraded to 6.12.10 and have changed my docker network type to ipvlan. Not really sure what else to do at this point and I'm hoping someone who knows more than me can help me figure this out! System specs: Dell PowerEdge R640 Dual 10 core Xeon Silver 4114 CPUs @ 2.20GHz (but just ordered 2x 20 core XEON GOLD 6148s) 144GB DDR4 ECC Tesla P4 GPU 104TB of storage with 1 parity disk. dl380p-diagnostics-20240517-1010.zip

sorry totally missed your response! I believe I have something similar enabled. Image attached this is what that command returns 04:00.0 VGA compatible controller: Matrox Electronics Systems Ltd. Integrated Matrox G200eW3 Graphics Controller (rev 04)

I recently repurposed my old poweredge t140 server to use unraid and run plex, radarr, sonarr, etc. I was previously using a very power hungry HP DL380P, but decided to dust this poweredge off because i realized the Xeon E-2124 3.3GHz processor supports quick sync. I followed a few different guides, installed the intel top gpu and gpu stats apps and no matter what I do I still only see card0 under /dev/dri. I read that on some other brands of servers that IPMI takes all the video output and quick sync isnt actually available, but cant find anything definitive about idrac, but I'm thinking that may be the case. Has anyone else had success using a similar set up? Here's the link to the specs for the server.