Doogs

I have 6.12.4 installed and I crashed hard this morning. I'll need to setup a syslog server on my workstation to get any idea of why. I also hooked my box's HDMI output to a TV so I can look at that as well.

You can't set your IPv6 address to the same one in someone else's post. Set your box to "automatic assignment"

Does your card disappear from nvidia-settings as well? My card does and if I leave it that way, my server will entirely lock up as well. Trying to see if there is a pattern here.

Hey ich, Installed the card with the correct power cable and I'm still having issues. The last thing I can do is try another card - I have access to 4 more of these. Any suggestions on what else I could do? EDIT - I'll pop the card back in, wait for the issue to happen and grab diag

Hey ich - Following up with you. I've removed the card and it (unraid) been stable. The nVidia M60 is powered by an 8-pin CPU cable and I don't think the stock 8-pin CPU cable will suffice since the official adapter takes 2 PCI-E cables and 'must carry 200+W....'. TL;DR - I don't think it's a plugin issue. I'll follow up again once I get the correct adapter. I can only surmise the card was working previously with the stock 8-pin CPU cable because my previous build was 7 drives and my latest build has double that. As always, thank you for your continued support and prompt responses! Cheers!

Update: Parity finished this morning and I did an upgrade to 6.11.5. Driver: 525.89.02 - Card Drops 525.85.05 - Card Drops 525.78.01 - Card Drops 525.60.13 - Card Drops Everytime I downgrade the firmware and hit reboot, the server doesn't reboot and I have to manually power cycel the box. 😞

I'm staying at 6.9.2 at the moment until a parity finishes because last Saturday I moved all the things to a new case (card was reseated during install and again when said card was blocking access to onboard SATA) and added a bunch of drives. I did a new config and I should have rebuilt the parity instead of telling unraid the parity is valid. I don't think that would cause the issues I'm having, but let me rule out the parity rebuild as a potential issue and I'll upgrade/try an older driver version. Only thing from my syslog output remotely related from Google-fu was here - back in 2020. I also don't have a normal "over the counter" GPU so that could be it as well. I will update you and thank you for responding!

I recently upgraded from 6.9.2 to 6.11.5 and my nVidia Tesla M60 will randomly disappear with the following messages in the syslog: NVRM: GPU 0000:03:00.0: request_irq() failed (-22) No VM's using the card. nvidia plugin sees my card as two GPU's - plex (docker) using 1 of them. I've attached my diag's just in case. Edit: Had to revert back to 6.9.2. Once the card disappears, the box responds to pings, but the UI doesn't. extremis-diagnostics-20230213-1457.zip