Alku1

YOU ARE THE MAN!! Geaendert und nun laeufts! Aber wirklich irre, dass man die info wirklich nirgends findet!? Oder bin ich einfach nur zu noob und das ist bei allen docker containern der Fall?

Hey, Ich haenge mich mal mit meinem Problem dran. Beim Aufsetzten meiner smarten Thermostate "_TZE200_6rdj8dzm" komme ich einfach nicht weiter. Das pairing hat funktioniert, allerdings sehe ich keine Sensoren/Aktoren der Thermostate. Nach online Recherche habe ich festgestellt, dass ich dafuer wahrscheinlich einen custom quirk hinzufuegen muss. Das Verzeichnis "custom_zha_quirks" habe ich in einem neuen Unterverzeichnis "config" im HA docker erstellt. Hier meine configuration.yaml # Loads default set of integrations. Do not remove. default_config: # Load frontend themes from the themes folder frontend: themes: !include_dir_merge_named themes automation: !include automations.yaml script: !include scripts.yaml scene: !include scenes.yaml zha: custom_quirks_path: /config/custom_zha_quirks/ Allerdings erhalte ich beim starten von HA den folgenden Fehler: Aus irgendeinem Grund kommt HA mit dem directory nicht klar, aber ich weiss nicht wieso Habt ihr einen Tipp?

Hey Im running a 6.12.4 Unraid Server und just installed the Zigbee2MQTT Docker. The docker image is supposed to create a folder with a config file in Appdata (the usual stuff...). Unfortunately the install process creates only an empty folder without the config file that I need to edit to get the docker to start in the first place. I reinstalled the image as well as restarted the server but the issue persists. The logs read as follows: cp: can't stat '/app/configuration.example.yaml': No such file or directory cp: can't stat '/app/configuration.example.yaml': No such file or directory cp: can't stat '/app/configuration.example.yaml': No such file or directory Using '/app/data' as data directory Creating configuration file... Using '/app/data' as data directory Creating configuration file... Using '/app/data' as data directory Creating configuration file... Does anyone else experience the issue?

Hey folks, Im an unRaid newbie but got my first server up and running. Im in th eprocess of migrating services from my old Ubuntu (corrupted) machine to a new unRaid setup. It was a steep learning curve but Im happy to say that most things are up and running, except the most important service Nextcloud! My old server was stuck on php 7.4 since I couldnt install any new software anymore and I guess thatshwy NC remains on version 25.0.9. It was a "plain" install without any docker or virtualization. After copying my mySQL, Nextcloud dir and the Nextcloud data dir I wanted to startup the container on the unraid machine but got confronted with an error saying that the old instance found is two major versions behind the current version on the new server. And its only supported to be one major version behind. So now it seems Im stuck having an old NC 25 backup and an up to date but empty unraid/docker container on version 27. Can someone guide me on how to resue my Nextcloud restoration project? Ideally pointing to some step by step guide since I already had my fair share of challenges moving all the files from a standalone install to a docker based setup. I was able to get docker to pull the 26.0.2 version from linuxserver. However, I seem to be lost in the next steps. Here is what I did: 1. Left MariDB Docker and Nextcloud data directory untouched (already had copied my backup into the respective folders). 2. Reinstalled Nextcloud container with 26.0.2 version. 3. Then copied my nextcloud dir backup into /mnt/cache/appdata/nextcloud/www/nextcloud/ Starting Nextcloud doesnt seem to recognize any of my restoration attempts. Here is the log after starting nextcloud container: When I try to open the webgui I just get a 404. I still feel very insecure whether I restored everything to the right folders since Im new to the docker environment. What is the best step by step routine to troubleshoot the situation and find out where things have gone wrong? Any help is greatly appreciated! Thank you in advance!! Server setup: - unRaid 6.12.3 - Appdata / Cache on a mirrored ZFS Pool 2x NVME SSD - ZFS RaidZ1 Pool with 3 HDDs (replacing the classic Array)

Thanks, I will try that!

Hi all, I have a weird issue around qbit port that I cant wrap my head around: A private tracker requires me to have a different port in the client besides the known torrent port (6881). Therefore, I changed the port in the webgui of qbit as well as in the docker container settings to 50123. Problem is that Im not considered connectable with that setting. I only get connectable if I change the port setting in the webgui of qbit back to standard (6881) so it matches the host port shown for the docker image. Then portforwaring works and Im also connectable. But if I do that, than my private tracker complains that the port is not allowed and blocks traffic (because it sees the internal qbit port (6881) instead of the external port 50123. How can I work around this? Is it possible to change the internal host port of qbittorent docker (see picture attached)? Can I avoid that qbit is sending the port info?

Thank you! I think I got docker to pull the 26.0.2 version from linuxserver. However, I seem to be lost in the next steps. Here is what I did: 1. Left MariDB Docker and Nextcloud data directory untouched (already had copied my backup into the respective folders). 2. Reinstalled Nextcloud container with 26.0.2 version. 3. Then copied my nextcloud dir backup into /mnt/cache/appdata/nextcloud/www/nextcloud/ Starting Nextcloud doesnt seem to recognize any of my restoration attempts. Here is the log after starting nextcloud container: When I try to open the webgui I just get a 404. I still feel very insecure whether I restored everything to the right folders since Im new to the docker environment. What is the best step by step routine to troubleshoot the situation and find out where things have gone wrong? Also when I open a terminal into the docker image and try to use my known commands e.g. activating maintenance mode in var/www/ Im just getting an error message. Where am I uspposed to run these (will be relevant for future OCC database issues going forward as well)?

Hey folks, Im an unRaid newbie but got my first server up and running. Im in th eprocess of migrating services from my old Ubuntu (corrupted) machien to a new unRaid setup.It was a steep learnign curve but Im happy to say that most things are up and running, except the most important service Nextcloud! My old server was stuck on php 7.4 since I couldnt install any new software anymore and I guess thatshwy NC remains on version 25.0.9. It was a "plain" install without any docker or virtualization. After copying my mySQL, Nextcloud dir and the Nextcloud data dir I wanted to startup the container on the unraid machine but got confronted with an error saying that the old instance found is two major versions behind the current version on the new server. And its only supported to be one major version behind. So now it seems Im stuck having an old NC 25 backup and an up to date but empty unraid/docker container on version 27. Can someone guide me on how to resue my Nextcloud restoration project? Ideally pointing to some step by step guide since I already had my fair share of challenges moving all the files from a standalone install to a docker based setup. Any help is greatly appreciated! Thank you in advance!! Server setup: - unRaid 6.12.3 - Appdata / Cache on a mirrored ZFS Pool 2x NVME SSD - ZFS RaidZ1 Pool with 3 HDDs (replacing the classic Array) tower-diagnostics-20230730-0726.zip

Great thank you! Im aware that the classic array is not something I can use with ZFS. But my understanding is that I can have Zraid1 on a pool which should offer similar functionality. Correct?

Hi folks, I’m a total Unraid newbie. I have been running an Ubuntu NAS with ZFS Pool and would like to migrate to an Unraid setup while investing in a completely new hardware setup. My goal is an energy efficient build that still is performant enough to satisfy a 2,5GB NIC. Hardware: GIGABYTE B760 I AORUS Pro DDR4 (2,5GB Intel NIC) 2x 32 GB Mushkin Essentials DIMM Kit 64GB, DDR4-3200, CL22-22-22-52 Intel Core i3-12100, 4C/8T, 3.30-4.30GHz, boxed, Sockel 1700 2x 1TB Samsung 970 Evo Plus 3x 12-16 TB HDDs Storage Array/pool: Zraid1 fully encrypted with 3 HDDs probably 12-16TB (depending on whats the best deal) Cache pool: 2x 1TB SSDs mirrored; My idea is to use ca. 500GB as cache and 500 GB for AppData, Dockers etc. Does it work to split that way? Extra SATA SSD as fast share: Potentially utilizing an old SATA drive with 256GB (if I ever need a fast access share) Planned applications: - Nextcloud - Plex / Jellyfin / Emby - Arr Suite - Home assistant - Some kind of Reverse proxy - Adguard / pihole What do you guys think. Is my planned hardware a good fit for the applications? Is the 500GB enough for app data and dockers? Im not even sure if its possiblet o split the cache pool like that?! Many thanks in advance for any help!