Ann4B3ll2019

Any Guidance I really dont want this to crash again.... Should I start with the database, using a different repository, I am at a loss. Thanks

Good afternoon, I am wanting some help with updating my nextcloud install. It seems every time I update the whole thing crashes and I spend days getting it back up, so I have not updated for a while. I do not remember what the last issue was but, to get it back running the fix I found was to use this repository. lscr.io/linuxserver/nextcloud:24.0.6-ls204 I am currently running: version: 25.0.13 SQLite3 3.35.5 PHP: 7.4.26 Nextcloud is really slow IMO so I am guessing moving to another database might help... I started with sqlite because I only have 5 users. What would be the recommended steps to updating without crashing this again. Thank you in advance!!!!!

I went into the HBA card and all of the drives show ATA but it does have the device info as SATA. This issue also started when I put in the SSD. I have not had an issue with mechanical drives....

So thinking back over the last year I had an issue with UD after an update so I rolled it back to around 2022.11ish, I fixed my issues over the last few months and updated to 2023.06 or 2023.07 and that seems to be when these new issues started. UD is up to date now. I also just realized that I have UD plus that is on 2022.11.06, and UD preclear on 2022.09.02 Could this old versions be an issue?

no drives have been removed, everything seemed well from last week so just decided to reboot to see if any issues would arise and here we are...

Ill check all the cables again. reboot was initiated from the dashboard...

So everything has been running fine over the last week till I rebooted this morning and now my drive is not showing a partition again... any help would be greatly appreciated. Jul 26 07:36:51 DT310 kernel: sd 1:0:3:0: [sde] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB) Jul 26 07:36:51 DT310 kernel: sd 1:0:3:0: [sde] Write Protect is off Jul 26 07:36:51 DT310 kernel: sd 1:0:3:0: [sde] Mode Sense: 7f 00 00 08 Jul 26 07:36:51 DT310 kernel: sd 1:0:3:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 26 07:36:51 DT310 kernel: sde: sde1 Jul 26 07:36:51 DT310 kernel: sd 1:0:3:0: [sde] Attached SCSI disk Jul 26 07:37:16 DT310 emhttpd: KINGSTON_SV300S37A60G_50026B773B020DA2 (sde) 512 117231408 Jul 26 07:37:16 DT310 emhttpd: read SMART /dev/sde Jul 26 07:37:36 DT310 unassigned.devices: Partition 'sde1' does not have a file system and cannot be mounted. dt310-diagnostics-20230726-0841.zip

I have done the same thing and now it seems like it is working after a few reboots dt310-diagnostics-20230718-1551.zip

Disks are in a R710 with backplane, going to an hba controler. yes i have a few disks with errors and that is why I am trying to replace them with these new drives the server has redundant 870W PSUs... would not think that is the issue. so the issue just happened again.... I am trying to get this one share back up and working. I installed a different drive cleared the drive formatted to xfs-encrypted, set password set the disk password under the unassigned devices settings changed the disk mount point the the share name that has been used in the past on the old drive (could this be causing the issue?) mount the drive transfer data from backup everything seems to be working, rebooted and the disk shows a grayed out mount box and does not have a file system and can not be mounted

FS: vfat Executing file system check: /sbin/fsck.vfat -n /dev/sdd1 2>&1 File system corruption detected! would you recommend trying to repair it or reformat the disk? xfs encrypted at the moment I do not have another linux box to put it in. I am not worried about loosing the data at the moment because i have a recent backup. I am more concerned at why this has happened twice in the last week and keeping it form doing it again...

It renamed itself to dev3 now I will work on the vfat disk later on... the unmountable disk is xfs-encrypted. I will see what I can do for another computer.

this is also interesting, when i click on the dev2 it shows up at dev1...

reboot did not fix... dt310-diagnostics-20230717-1315.zip

Good afternoon, I recently ran into some trouble and I thought it was a dead drive and now after a week with a new drive this has happened again. I have a drive I replaced with an SSD formatted it to an encrypted file system. a few days later the drive appeared not to have a file system and unraid wanted me to format the drive and the mount button was grayed out. Thought it was an old drive and I purchased a new one. And to day I got the same thing... except it is still showing the mountpoint. Any help would be appreciated. text error warn system array login Jul 17 11:08:21 DT310 kernel: sd 1:0:1:0: [sdc] Spinning up disk... Jul 17 11:08:21 DT310 kernel: sd 1:0:1:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) Jul 17 11:08:21 DT310 kernel: sd 1:0:1:0: [sdc] Write Protect is off Jul 17 11:08:21 DT310 kernel: sd 1:0:1:0: [sdc] Mode Sense: 7f 00 00 08 Jul 17 11:08:21 DT310 kernel: sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 17 11:08:21 DT310 kernel: sdc: sdc1 Jul 17 11:08:21 DT310 kernel: sd 1:0:1:0: [sdc] Attached SCSI disk Jul 17 11:08:46 DT310 emhttpd: WD_easystore_SSD_240GB_224301A0054B (sdc) 512 468862128 Jul 17 11:08:46 DT310 emhttpd: read SMART /dev/sdc Jul 17 11:08:53 DT310 unassigned.devices: Partition 'sdc1' does not have a file system and cannot be mounted. ** Press ANY KEY to close this window **