curving-stepladder2787

well i figured it out. on the boot menu that has all the drives listed, it was listed way at the bottom of 10 drives. I moved it up to 1st and that was that. thanks to those who, sent ideas.

Replaced battery nada. reset to default bios settings then set to boot only to UEFI. Nada as well. is it even supposed to boot to uefi? or just to the legacy side of the usb? I ask because a project computer i have wont boot to uefi either. Brand new usb. gte some sort of red screen error message about secure something or another. grrrr

I'll try but sounds too easy for the way my life works.

long story short is i can now longer boot to unraid unless manual.

Boot order is thus UEFI USB nothing nothing will not see non UEFI side of USB in boot order only in the "once time" options Thanks anyway

So i pulled my USB drive out of my server to check to see if a different project would boot to unraid. All i cared about was it getting to the startup screen. It didn't but thats for latter. when i re inserted my USB to it's server it wouldn't boot into Uefi mode. About when it should start the process it dumps me back into bios. no mater what i try i can't get it to boot to uefi. I CAN get it to boot to non uefi mode by clicking it to boot from the disk one time, but it never accepts that mode as automatic. Does this make sense? Again, changed no hardware no settings until after it wouldn't boot, and then just the boot order. its been running fine for the better part of 6 years without needing to change a thing.

Thank you Krusader is a little weird

OK i think i got this figured out. My test flac went well. So can i do something like this to the whole drive pool to look for stuff using the windows explorer. I am unused to unix files and again thanks

OK lets try this I have a folder named flac its some where on the array. it is filed with flac files. I want to make a Share name Flac to share this folder in windows and be able to move a song to windows

TV was just an example

ok say i want my TV shares to access the TV folder on the the disk(s) I should be able to find the folder and and have the files available. I thought it was the read write buttons. The read section, only has the arrow box which only shows my existing shares The read and write buttons are greyed out even on the shares i have

yeah this one is better Thank you for your patience brainiac-diagnostics-20240214-1618.zip

exported with SMD only. I created other shares a few months ago and i didn't change any settings, before this issue I just realized the my SMB settings don't show. Export Yes Case sensitive Auto Security Public This utility is used for troubleshooting purposes. It will collect all of the system information and configuration files, and package these files in a single ZIP file which can be saved locally. Subsequently, this file can be included in your correspondence with Limetech or the Unraid forum. This will help others to quickly get the inside information of your system and provide better support to your problem. The following information and configuration files are collected: + /config copy all *.cfg files, go file and the super.dat file. These are configuration files. + /config/shares copy all *.cfg files. These are user share settings files. + Syslog file(s) copy the current syslog file and any previous existing syslog files. + System save output of the following commands: lsscsi, lspci, lsusb, free, lsof, ps, ethtool & ifconfig. display of iommu groups. display of command line parameters (e.g. pcie acs override, pci stubbing, etc). save system variables. + SMART reports save a SMART report of each individual disk present in your system. + Docker save files docker.log, libvirtd.log, libvirt/qemu/*.log and vfio-pci. Clicking Download will start the collection process and then instruct your browser to save the zip file locally. No personal information such as user names, passwords, or any other file contents not specified above is included by Unraid OS; however, your server name, IP address, and user share names will be included. Note that 3rd-party plugins may or may not store personal information in plugin-specific configuration files and/or output to the system log.

OK. you make a share. how do you fill it? you have a folder with data on the drives that you want share. I have nothing that i can point to the data is on my array

Fixed screen shot. What i am having a hard time with is i create a share i can add any files for it I am trying to move files from other parts of the array that i cant seem to access. I even tried krusader and couldn't access the files i'm looking for

if i share disk over network it will be temporary. What i want to do is put the files that are not in other shares. Like the first time you make a share and yes i had to remind my self how to do srceenshots.

Hello, i seem to forgot how to populate a share to the disk location. I checked a lot of youtube videos but no one in there adds the data. Global settings enable disk shares yes enable user shares yes included disks all exluded disk none Permit exclusive shares no tuneable Yes tuneable direct io auto When i try to set it in the shares tab the drop downs on read write only shows the other shares. When i did this before it was covered on space invaders how to set up unraid series but i cant seem to find them. Any help appreciated. i am not stepladder. Google login is wonky